PLA+ Milky White Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eSun it is considerably stronger and tougher than standard PLA and less likely to break, yet just as easy to print. Parts come out with smooth surfaces and clean layer lines and stand up well to everyday use. Whether prototype, bracket, enclosure or figure: PLA+ is a safe choice for almost any project and also runs reliably on fast printers. The spool holds 1 kg of 1.75 mm filament in the colour Milky White. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

More colours PLA+:
                                                                                                   


Recommended Accessories:


Features:

  • Tough and hard to break, according to eSun considerably stronger than standard PLA
  • Easy to print, smooth surface and clean layer lines
  • Also runs very well on fast printers: up to 300 mm/s, a speed rarely used in practice
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 53 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Mechanical parts such as brackets, housings and covers
  • Cosplay parts and props
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI (textured)
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 300 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+ (enhanced PLA)
  • Colour: Milky White
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 3.7 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 53.78 °C (0.45 MPa)
  • Tensile strength: 70.37 MPa (X-Y), 36.36 MPa (Z)
  • Elongation at break: 4.14 % (X-Y), 2.92 % (Z)
  • Flexural strength: 100.3 MPa (X-Y), 56.4 MPa (Z)
  • Flexural modulus: 3259.39 MPa (X-Y), 2873.94 MPa (Z)
  • Izod impact strength: 7.27 kJ/m² (X-Y), 2.22 kJ/m² (Z)
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+ filament Milky White, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+ Milky White Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 424467
  • Availability: In Stock
  • CHF14.90

  • Ex Tax: CHF13.78

Related Products

PLA+ White Filament 1.75mm 1Kg eSun

PLA+ White Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Silk White Filament 1.75mm 1Kg eSun

PLA Silk White Filament 1.75mm 1Kg eSun

The eSilk-PLA White was specially developed to obtain particularly smooth and shiny surfaces on the ..

CHF16.90 Ex Tax: CHF15.63

PLA+ Bone White Filament 1.75mm 1Kg eSun

PLA+ Bone White Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Matte Milky White Filament 1.75mm 1Kg eSun

PLA Matte Milky White Filament 1.75mm 1Kg eSun

ePLA-Matte Milky White is a PLA-based filament by eSun. eSun's ePLA-Matte series merges the excellen..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Cold White High Speed Filament 1.75mm 1Kg eSun

PLA+HS Cold White High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+HS White High-Speed Filament 1.75mm 1Kg eSun

PLA+HS White High-Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+ White CMYK Filament Hueforge 1.75mm 1Kg eSun

PLA+ White CMYK Filament Hueforge 1.75mm 1Kg eSun

PLA+ CMYK from eSun is made for Hueforge. The software turns an image into a flat relief of thin col..

CHF14.90 Ex Tax: CHF13.78

PLA Basic White Filament 1.75mm 1kg eSun

PLA Basic White Filament 1.75mm 1kg eSun

With the PLA Basic Filament from eSun, you receive an affordable yet high-quality printing material,..

CHF11.90 Ex Tax: CHF11.01

PLA Basic Cold White Filament 1.75mm 1Kg eSun

PLA Basic Cold White Filament 1.75mm 1Kg eSun

With the PLA Basic filament from eSun, you get a cost-effective yet high-quality printing material t..

CHF10.90 Ex Tax: CHF10.08

PLA Basic White Refill Filament 1.75mm 1Kg eSun

PLA Basic White Refill Filament 1.75mm 1Kg eSun

Are you looking for a high-quality filament for your 3D printer that is reliable, environmentally fr..

CHF11.40 Ex Tax: CHF10.55

PLA+ White Refill Filament 1.75mm 1Kg eSun

PLA+ White Refill Filament 1.75mm 1Kg eSun

Discover the sustainable and high-quality PLA+ Refill Filament from eSun with a 1.75mm diameter – no..

CHF13.50 Ex Tax: CHF12.49

PLA+ Cold White Refill Filament 1.75mm 1Kg eSun

PLA+ Cold White Refill Filament 1.75mm 1Kg eSun

Discover the sustainable and high-quality PLA+ Refill Filament from eSun with a 1.75mm diameter – no..

CHF13.50 Ex Tax: CHF12.49

PLA Hyper RFID White Filament 1.75mm 1Kg Creality

PLA Hyper RFID White Filament 1.75mm 1Kg Creality

With the PLA Hyper RFID Filament from Creality, you experience 3D printing in a new dimension. This ..

CHF25.90 Ex Tax: CHF23.96

PolyTerra PLA Cotton White Filament 1.75mm 1Kg

PolyTerra PLA Cotton White Filament 1.75mm 1Kg

PolyTerra PLA is a very easy-to-print filament that provides reliable results for both beginners and..

CHF14.90 Ex Tax: CHF13.78

Panchroma PLA Cold White Filament 1.75mm 1Kg

Panchroma PLA Cold White Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..

CHF18.90 Ex Tax: CHF17.48

PLA+HS Milky White High Speed Filament 1.75mm 1Kg eSun

PLA+HS Milky White High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

Tags: PLA, Filament, Speed, affordable, PLA+, 1.75mm, eSun, 3D printing, high-speed, print quality, prototyping, warp-free, eco-friendly, extruder, print bed, FDM, fast, quality, inexpensive, 3D printer, printer, plastic Bambu, Creality, white, PLA+