PLA+ Olive Green Filament 1.75mm 1Kg eSun

PLA Plus Olive Green from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Impact resistance
• Layer adhesion
• Flame retardant
• Odorless when printing

eSUN PLA+ is considered by many as the new standard for PLA printing and also offers you a very good price-performance ratio. It is not only easier to process but also produces better 3D printed parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print, and also offers good adhesive properties and almost no warping effect when printing! PLA+ is also a very good alternative to ABS when something needs to be impact-resistant, e.g., printed children's toys! PLA+ has excellent elongation and bending strength to resist falls, bumps, and breaks by elongation. PLA+ also does not emit odors when printing, unlike ABS.

Properties PLA+:

• Very durable
• Easy to print
• Very good adhesion on the print bed
• High accuracy of less than +-0.05mm in diameter
• Top print quality and great price-performance ratio

Bambu Lab AMS compatible cardboard roll:

Our cardboard rolls are perfectly adapted for use with the Bambu Lab AMS. The plastic coating of the cardboard surface allows for handling just like traditional plastic rolls without an adapter. An environmentally friendly solution that does not compromise on comfort.

• Perfect compatibility: Can be used directly in the Bambu Lab AMS without additional tools.
• Easy to handle: Usable like plastic rolls due to the plastic coating of the cardboard surface.
• Environmentally friendly: Easy and ecological disposal through cardboard recycling paths.

PLA+ recommended printing parameters:

• Print temperature: 205-225°C Recommended: 210°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety Data Sheet PLA+
• Filament Data Sheet

Technical Details:

• Color: Olive Green
• Item number: PLA+175OG1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break: 29%
• Tensile strength: 60MPa
• Heat deflection temperature: 52°C
• Spool size outer diameter: 20cm
• Spool width: 6.7cm
• Inner diameter (hole): 5.3cm
• Filament weight: 1000g
• Empty spool weight: 278g
• Total weight: 1460g
• Dimensions: 205 x 215 x 75mm

Delivery Contents:

• 1x PLA+ Olive Green Filament 1.75mm 1Kg eSun