PLA+ Pink Filament 1.75mm 1Kg eSun

PLA Plus Pink  PLA+175P1 from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Fracture resistance
• Layer adhesion
• Flame retardant
• Odorless when printing

eSUN PLA+ is considered by many to be a new standard for PLA printing and also offers you a very good price-performance ratio. It is not only easier to process but you also produce better 3D printed parts with smooth and clean surfaces.

Conclusion: PLA+ is well-suited for both beginners and professionals, is easy to print, and also offers good adhesion properties and almost no warp effect during printing! PLA+ is also a very good alternative to ABS if something needs to be break-resistant, e.g., printed children's toys! PLA+ has very good elongation and bending strength to resist falls, impacts, and breaks through stretching. When printing with PLA+, no odors are produced, unlike with ABS.

PLA+ Properties:

• Very durable
• Easy to print
• Very good adhesion on the print bed
• Top print quality and great price-performance ratio

PLA+ Recommended Printing Parameters:

• Printing temperature: 205-225°C Recommended: 210°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed rate: 40-60mm/s (2400-3600mm/min)

Bambu Lab AMS-compatible cardboard spool:

Our cardboard spools are perfectly calibrated for use with the Bambu Lab AMS. The plastic coating of the cardboard running surface allows handling as with conventional plastic spools—without any adapter. An environmentally friendly solution that does not overlook comfort.

• Perfect compatibility: Can be used directly in the Bambu Lab AMS without additional tools.
• Easy handling: Usable like plastic spools due to the plastic coating of the cardboard running surface.
• Environmentally friendly: Simple and ecological disposal via cardboard recycling channels.

Download:

• eSun Product Manual
• PLA+ Safety Data Sheet
• Filament Data Sheet

Technical Details:

• Color: Pink
• Article number:  PLA+175P1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break: 29%
• Tensile strength: 60MPa
• Heat resistance: 52°C
• Spool size outer diameter: 200mm
• Spool width: 64mm
• Inner diameter (hole): 55mm
• Filament weight: 1000g
• Total weight: 1360g
• Dimension: 198 x 198 x 60mm

Scope of Delivery:

• 1x PLA+ Pink Filament 1.75mm 1Kg eSun