PLA+ Silver Filament 1.75mm 1Kg eSun

PLA Plus Silver PLA+175S1 from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Impact resistance
• Layer adhesion
• Flame retardant
• Odorless when printing

eSUN PLA+ is considered by many as the new standard for PLA printing and also offers you a very good price-performance ratio. It is not only easier to process, but you also produce better 3D printed parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, it is easy to print and also offers you good adhesion properties and almost no warp effect when printing! PLA+ is also a very good alternative to ABS when something needs to be impact-resistant, for example, printed children's toys! PLA+ has very good tensile and flexural strength to withstand drops, impacts, and breaks due to deformation. When printing with PLA+, no odors are produced, as is the case with ABS.

Properties of PLA+:

• Very durable
• Easy to print
• Very good adhesion on the print bed
• Top print quality and great price-performance ratio

PLA+ recommended printing parameters:

• Printing temperature: 205-225°C Recommended: 210°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed speed: 40-60mm/s (2400-3600mm/min)

Bambu Lab AMS-compatible cardboard spool:

Our cardboard spools are perfectly tuned for use with the Bambu Lab AMS. The plastic coating of the cardboard running surface allows for handling just like conventional plastic spools – without an adapter. An eco-friendly solution that does not compromise on comfort.

• Perfect compatibility: Can be used directly in the Bambu Lab AMS without additional tools.
• Easy to handle: Usable like plastic spools due to the plastic coating of the cardboard running surface.
• Eco-friendly: Simple and ecological disposal via cardboard recycling paths.

Download:

• eSun Product Manual
• Safety Data Sheet PLA+
• Filament Data Sheet

Technical Details:

• Color: Silver 
• Item number: PLA+175S1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break: 29%
• Tensile strength: 60MPa
• Form stability: 52°C
• Spool size outer diameter: 200mm
• Spool width: 64mm
• Inner diameter (hole): 55mm
• Filament weight: 1000g
• Total weight: 1360g
• Dimensions: 198 x 198 x 60mm

Scope of delivery:

• 1x PLA+ Filament 1.75mm Silver 1Kg eSun