PLA+ Gold Filament 1.75mm 1Kg eSun

PLA Plus Gold PLA+175J1P1 from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Fracture resistance
• Layer adhesion
• Flame retardant
• Odorless when printing

eSUN PLA+ is considered by many to be the new standard for PLA printing and also offers you very good value for money. It is not only easier to process, but you also produce better 3D printed parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print, and offers you good adhesion properties and almost no warping effect when printing! PLA+ is also a very good alternative to ABS when something needs to be break-resistant, e.g., printed children's toys! PLA+ has very good elongation and flexural strength to withstand falls, impacts, and breaks through elongation. When printing with PLA+, no odors are produced, unlike with ABS.

Properties of PLA+:

• Very durable
• Easy to print
• Very good adhesion on the print bed
• Top print quality and great value for money

PLA+ recommended printing parameters:

• Printing temperature: 205-225°C Recommended: 210°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed rate: 40-60mm/s (2400-3600mm/min)

Bambu Lab AMS compatible cardboard roll:

Our cardboard rolls are perfectly tuned for use with the Bambu Lab AMS. The plastic coating of the cardboard running surface allows handling like conventional plastic rolls – without any adapter. An environmentally friendly solution that doesn’t compromise on comfort.

• Perfect compatibility: Usable directly in Bambu Lab AMS without additional tools.
• Easy handling: Usable like plastic rolls due to the plastic coating of the cardboard running surface.
• Environmentally friendly: Simple and ecological disposal through cardboard recycling paths.

Download:

• eSun Product Manual
• Safety Data Sheet PLA+
• Filament Data Sheet

Technical details:

• Color: Gold
• Item number: PLA+175J1P1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break: 29%
• Tensile strength: 60MPa
• Heat resistance: 52°C
• Spool size outer diameter: 200mm
• Spool width: 64mm
• Inner diameter (hole): 55mm
• Filament weight: 1000g
• Total weight: 1360g
• Dimensions: 198 x 198 x 60mm

Scope of delivery:

• 1x PLA+ Gold Filament 1.75mm 1Kg eSun