PLA+ Holly Green Filament 1.75mm 1Kg eSun

PLA+ Holly Green from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Fracture toughness
• Layer adhesion
• Flame retardant
• Odorless during printing

eSUN PLA+ is considered by many as the new standard for PLA printing and also offers you a very good price-performance ratio. It is not only easier to process, but you also produce better 3D-printed parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print, and also offers you good adhesion properties and almost no warping effect during printing! PLA+ is also a very good alternative to ABS if something needs to be fracture-resistant, e.g., printed children's toys! PLA+ has very good elongation and bending strength to withstand falls, impacts, and fractures due to stretching. During printing, PLA+ does not produce any odors, as is the case with ABS.

Properties of PLA+:

• Very durable
• Easy to print
• Very good adhesion on the print bed
• Top print quality and great price-performance ratio

PLA+ recommended print parameters:

• Printing temperature: 210-230°C Recommended: 220°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed speed: 40-60mm/s (2400-3600mm/min)

Bambu Lab AMS compatible cardboard spool:

Our cardboard spools are perfectly tuned for use with the Bambu Lab AMS. The plastic coating of the cardboard running surface allows handling like conventional plastic spools - without any adapter. An environmentally friendly solution that does not neglect comfort.

• Perfect compatibility: Usable directly in the Bambu Lab AMS without additional tools.
• Easy to handle: Usable like plastic spools due to the plastic coating of the cardboard running surface.
• Environmentally friendly: Easy and ecological disposal via cardboard recycling paths.

Download:

• eSun Product Manual
• Sicherheitsdatenblatt PLA+
• Datenblatt Filament

Technical Details:

• Manufacturer: eSun
• Manufacturer SKU: PLA+175O-HG1P1
• Color: Holly Green
• Filament Weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing Temperature: 210-230°C
• Density: 1.24g/cm3
• Melt Flow Index: 2g/10min
• Impact Toughness: 7kJ/m²
• Elongation at Break: 29%
• Tensile Strength: 60MPa
• Form Stability: 52°C
• Spool Size Outer Diameter: 200mm
• Spool Width: 64mm
• Diameter Inside (Hole): 55mm
• Filament Weight: 1000g
• Total Weight: 1360g
• Dimensions: 198 x 198 x 60mm

Scope of Delivery:

• 1x PLA+ Holly Green Filament 1.75mm 1Kg eSun