PLA+ RGB Green Filament 1.75mm 1Kg eSun

PLA+ RGB Green from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Impact resistance
• Layer adhesion
• Flame retardant
• Odorless when printing

eSUN PLA+ is considered by many as the new standard for PLA printing and offers you a very good price-to-performance ratio. It is not only easier to process, but you also produce better 3D printed parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print, and also offers good adhesion properties with almost no warping effect during printing! PLA+ is also a very good alternative to ABS if something needs to be impact resistant, such as printed children's toys! PLA+ has excellent elongation and flexural strength to withstand drops, impacts, and breaks due to stretching. No odors are produced when printing with PLA+, as is the case with ABS.

Properties of PLA+:

• Highly durable
• Easy to print
• Excellent adhesion on the print bed
• Top printing quality and great price-to-performance ratio

PLA+ Recommended Printing Parameters:

• Printing temperature: 210-230°C Recommended: 220°C
• Hot bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed rate: 40-60mm/s (2400-3600mm/min)

Bambu Lab AMS Compatible Cardboard Roll:

Our cardboard rolls are perfectly matched for use with the Bambu Lab AMS. The plastic coating of the cardboard running surface allows handling like conventional plastic rolls - without the need for an adapter. An environmentally friendly solution that does not compromise on comfort.

• Perfect compatibility: Can be used directly in the Bambu Lab AMS without additional tools.
• Easy to handle: Usable like plastic rolls due to the plastic coating of the cardboard running surface.
• Environmentally friendly: Simple and ecological disposal through cardboard recycling paths.

Download:

• eSun Product Manual
• Safety Data Sheet PLA+
• Filament Data Sheet

Technical Details:

• Manufacturer: eSun
• Manufacturer SKU: PLA+175P-G1P1
• Color: RGB Green
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 210-230°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break:29%
• Tensile strength: 60MPa
• Thermal stability: 52°C
• Spool size outer diameter: 200mm
• Spool width: 64mm
• Inner diameter (hole): 55mm
• Filament weight: 1000g
• Total weight: 1360g
• Dimensions: 198 x 198 x 60mm

Scope of Delivery:

• 1x PLA+ RGB Green Filament 1.75mm 1Kg eSun