PLA+ Green Filament 1.75mm 1Kg eSun

PLA Plus green PLA+175G1 from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Fracture resistance
• Layer adhesion
• Flame retardant
• Odorless when printing

eSUN PLA+ is considered by many as the new standard for PLA printing and also offers you a very good price-performance ratio. It is not only easier to process, but you also produce better 3D print parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print, and also offers you good adhesion properties and almost no wrap effect when printing! PLA+ is also a very good alternative to ABS when something needs to be impact resistant, for example, printed children's toys! PLA+ has very good elongation and flexural strength to withstand falls, bumps, and breaks due to stretching. When printing with PLA+, no odors are emitted, as is the case with ABS.

Properties PLA+:

• Very resistant
• Easy to print
• Very good adhesion on the print bed
• Top print quality and great price-performance ratio

Bambu Lab AMS compatible cardboard roll:

Our cardboard rolls are perfectly tuned for use with the Bambu Lab AMS. The plastic coating of the cardboard running surface allows handling like conventional plastic rolls - without any adapter. An environmentally friendly solution that does not neglect comfort.

• Perfect compatibility: Usable directly in Bambu Lab AMS without additional tools.
• Easy to handle: Due to the plastic coating of the cardboard running surface, usable like plastic rolls.
• Environmentally friendly: Easy and ecological disposal through cardboard recycling paths.
  

PLA+ recommended printing parameters:

• Printing temperature: 205-225°C Recommended: 210°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed rate: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety Data Sheet PLA+
• Filament Data Sheet

Technical Details:

• Color: Green
• Item number: PLA+175G1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break: 29%
• Tensile strength: 60MPa
• Heat deflection temperature: 52°C
• Spool size outer diameter: 20cm
• Spool width: 6.7cm
• Inner diameter (hole): 5.3cm
• Filament weight: 1000g
• Empty spool weight: 278g
• Total weight: 1460g
• Dimensions: 205 x 215 x75mm

Scope of delivery:

• 1x ESUN PLA+ Filament 1.75mm Green 1Kg