PLA+ Peak Green Filament 1.75mm 1Kg eSun

PLA Plus Peak Green PLA+175O-V1P1 from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Tensile strength
• Layer adhesion
• Flame retardant
• Odorless during printing

eSUN PLA+ is considered by many as the new standard for PLA printing and also offers you a very good price-performance ratio. It is not only easier to work with, but you also produce better 3D printed parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print, and also offers you good adhesive properties and almost no wrap effect when printing! PLA+ is also a very good alternative to ABS when something needs to be break-resistant, for example printed children's toys! PLA+ has very good elongation and flexural strength, to withstand falls, impacts, and breakages due to elongation. PLA+ also does not emit any odors while printing, as is the case with ABS.

Properties PLA+:

• Very resistant
• Easy to print
• Very good adhesion on the print board
• Top print quality and great price-performance ratio

PLA+ recommended print parameters:

• Print temperature: 205-225°C Recommended: 210°C
• Heating bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety data sheet PLA+
• Data sheet Filament

Technical details:

• Color: Peak Green
• Article number: PLA+175O-V1P1
• Weight Filament: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print Temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break:29%
• Tensile strength: 60MPa
• Form stability: 52°C
• Spool size diameter outside: 20cm
• Spool Width: 6.7cm
• Diameter inside (hole): 5.3cm
• Filament weight: 1000g
• Empty reel weight: 278g
• Total weight: 1460g
• Dimension: 205 x 215 x75mm

Contents:

• 1x PLA+ Peak Green Filament 1.75mm 1Kg eSun