PLA+ Purple Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eSun it is considerably stronger and tougher than standard PLA and less likely to break, yet just as easy to print. Parts come out with smooth surfaces and clean layer lines and stand up well to everyday use. Whether prototype, bracket, enclosure or figure: PLA+ is a safe choice for almost any project and also runs reliably on fast printers. The spool holds 1 kg of 1.75 mm filament in the colour Purple. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.
Recommended Accessories:
- Filament dryers (dry box): all models in our shop
- Filament Vacuum Set Pro 3 eVacuum by eSun
- 5 Pcs. Filament Vacuum Bags Pro 3 from eSun
- 1 Liter Isopropyl Alcohol/Isopropanol 99.8%
- 3DLac Adhesive Spray 400ml
Features:
- Tough and hard to break, according to eSun considerably stronger than standard PLA
- Easy to print, smooth surface and clean layer lines
- Also runs very well on fast printers: up to 300 mm/s, a speed rarely used in practice
- Holds up outdoors, but may fade over time in strong sunlight. Softens from about 53 °C
- If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
- Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
- Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
- Vacuum-packed with desiccant
Application Examples:
- Prototypes and functional samples
- Mechanical parts such as brackets, housings and covers
- Cosplay parts and props
- Models, figures and decoration
Documentation:
Recommended Print Settings:
- Nozzle temperature: 220 °C (210 to 230 °C)
- Print bed temperature: 55 °C (45 to 60 °C)
- Print bed: PEI (textured)
- Part cooling fan: 100 %
- Print speed: slicer's default profile, up to 300 mm/s
Technical Data:
- Manufacturer: eSun
- Material: PLA+ (enhanced PLA)
- Colour: Purple
- Filament diameter: 1.75 mm
- Tolerance: ±0.05 mm
- Filament weight: 1 kg
- Density: 1.24 g/cm³
- Melt flow index: 3.7 g/10 min (190 °C / 2.16 kg)
- Heat deflection temperature: 53.78 °C (0.45 MPa)
- Tensile strength: 70.37 MPa (X-Y), 36.36 MPa (Z)
- Elongation at break: 4.14 % (X-Y), 2.92 % (Z)
- Flexural strength: 100.3 MPa (X-Y), 56.4 MPa (Z)
- Flexural modulus: 3259.39 MPa (X-Y), 2873.94 MPa (Z)
- Izod impact strength: 7.27 kJ/m² (X-Y), 2.22 kJ/m² (Z)
- Spool: cardboard
- Spool outer diameter: 200 mm
- Spool hole diameter: 55 mm
- Spool width: 62 mm
- Gross weight: 1303 g
Scope of Delivery:
- 1× PLA+ filament Purple, 1.75 mm, 1 kg on cardboard spool
PLA+ Purple Filament 1.75mm 1Kg eSun
- Brand: eSUN
- Product Code: 420903
- Availability: In Stock
-
CHF14,90
- Ex Tax: CHF13,78
Related Products
PLA Silk Purple Filament 1.75mm 1Kg eSun
The eSilk-PLA Violet was specifically developed to achieve particularly smooth and shiny surfaces on..
CHF16,90 Ex Tax: CHF15,63
PLA+ Very Peri Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14,90 Ex Tax: CHF13,78
PLA Twinkling Purple Filament 1.75mm 1Kg eSun
eTwinkling Purple is a PLA-based filament from eSun. The eTwinkling line from eSun combines the exce..
CHF15,90 Ex Tax: CHF14,71
PLA Matte Purple Filament 1.75mm 1Kg eSun
ePLA-Matte Purple is a PLA based filament from eSun. The ePla-Matte series from eSun combines the ex..
CHF16,90 Ex Tax: CHF15,63
PLA+HS Purple High Speed Filament 1.75mm 1Kg eSun
PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..
CHF16,90 Ex Tax: CHF15,63
PLA Basic Purple Filament 1.75mm 1Kg eSun
With the PLA Basic Filament from eSun, you get a cost-effective yet high-quality printing material t..
CHF11,90 Ex Tax: CHF11,01
PLA Hyper Violet Filament 1.75mm 1Kg Creality
The Creality PLA Hyper Filament enables ultra-fast printing speeds of up to 600 mm/s, significantly ..
CHF20,90 Ex Tax: CHF19,33
PLA+ Lilac Purple Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14,90 Ex Tax: CHF13,78
PLA Basic Purple Refill Filament 1.75mm 1Kg eSun
Are you looking for a high-quality filament for your 3D printer that is reliable, eco-friendly, and ..
CHF11,40 Ex Tax: CHF10,55
PLA Hyper RFID Very Peri Filament 1.75mm 1Kg Creality
With the PLA Hyper RFID Filament from Creality, you will experience 3D printing in a new dimension. ..
CHF25,90 Ex Tax: CHF23,96
PLA Hyper RFID Purple Filament 1.75mm 1Kg Creality
With the PLA Hyper RFID Filament from Creality, you experience 3D printing in a new dimension. This ..
CHF25,90 Ex Tax: CHF23,96
PLA Basic Grape Violet Filament 1.75mm 1Kg eSun
With eSun's PLA Basic filament, you receive a cost-effective yet high-quality printing material spec..
CHF11,90 Ex Tax: CHF11,01
PLA Basic Grape Purple Refill Filament 1.75mm 1Kg eSun
Are you looking for a high-quality filament for your 3D printer that is reliable, environmentally fr..
CHF11,40 Ex Tax: CHF10,55
PolyTerra PLA Lavender Violet Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that allows both beginners and experienced users to a..
CHF14,90 Ex Tax: CHF13,78
PolyTerra PLA Army Violet Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that allows both beginners and experienced users to a..
CHF14,90 Ex Tax: CHF13,78
PolyTerra PLA Electric Indigo Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that enables reliable results for both beginners and ..
CHF14,90 Ex Tax: CHF13,78
PolyTerra PLA Periwinkle Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that enables both beginners and experienced users to ..
CHF14,90 Ex Tax: CHF13,78
Tags: Violet, purple, PLA+175Z1, Esun, PLA, PLA+, Plus, Filament, 1.75, Printer, Landi, Landi Filament, 3D Printer, FDM, Plastic























