PLA+ Bone White Filament 1.75mm 1Kg eSun

PLA Plus Bone white  from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Tensile strength
• Layer adhesion
• Flame resistant
• Odorless when printing

eSUN PLA+ is considered by many to be the new standard for PLA printing and also offers a very good price-performance ratio. It is not only easier to process, but you also produce better 3D printed parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print and also offers good adhesion properties and almost no wrap effect when printing! PLA+ is also a very good alternative to ABS, if something needs to be break-resistant, like printed children's toys! PLA+ has a very good elongation and bending strength to withstand falls, shocks, and breaks due to elongation. When printing with PLA+, there are no odors as there are with ABS.

PLA+ properties:

• Very resistant
• Easy to print
• Very good adhesion on the printboard
• High accuracy of less than +-0.05mm in diameter
• Top print quality and super price-performance ratio

Recommended PLA+ print parameters:

• Printing temperature: 205-225°C Recommended: 210°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety data sheet PLA+
• Data sheet Filament

Technical Details:

• Color: Bone white 
• Item number: PLA+P175BW1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact resistance: 7kJ/m²
• Elongation at break:29%
• Tensile strength: 60MPa
• Dimensional stability: 52°C
• Spool size diameter outside: 20cm
• Spool width: 6.7cm
• Inside diameter (hole): 5.3cm
• Filament weight: 1000g
• Weight of empty spool: 278g
• Total weight: 1460g
• Dimension: 205 x 215 x75mm

Package content:

• 1x PLA+ Bone white Filament 1.75mm 1Kg eSun