PLA+ Yellow Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eSun it is considerably stronger and tougher than standard PLA and less likely to break, yet just as easy to print. Parts come out with smooth surfaces and clean layer lines and stand up well to everyday use. Whether prototype, bracket, enclosure or figure: PLA+ is a safe choice for almost any project and also runs reliably on fast printers. The spool holds 1 kg of 1.75 mm filament in the colour Yellow. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

More colours PLA+:
                                                                                                   


Recommended Accessories:


Features:

  • Tough and hard to break, according to eSun considerably stronger than standard PLA
  • Easy to print, smooth surface and clean layer lines
  • Also runs very well on fast printers: up to 300 mm/s, a speed rarely used in practice
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 53 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Mechanical parts such as brackets, housings and covers
  • Cosplay parts and props
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI (textured)
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 300 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+ (enhanced PLA)
  • Colour: Yellow
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 3.7 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 53.78 °C (0.45 MPa)
  • Tensile strength: 70.37 MPa (X-Y), 36.36 MPa (Z)
  • Elongation at break: 4.14 % (X-Y), 2.92 % (Z)
  • Flexural strength: 100.3 MPa (X-Y), 56.4 MPa (Z)
  • Flexural modulus: 3259.39 MPa (X-Y), 2873.94 MPa (Z)
  • Izod impact strength: 7.27 kJ/m² (X-Y), 2.22 kJ/m² (Z)
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+ filament Yellow, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+ Yellow Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 420898
  • Availability: Out Of Stock
  • CHF14.90

  • Ex Tax: CHF13.78

Related Products

PLA Silk Yellow Filament 1.75mm 1Kg eSun

PLA Silk Yellow Filament 1.75mm 1Kg eSun

The eSilk-PLA Yellow was specially developed to provide particularly smooth and shiny surfaces on 3D..

CHF16.90 Ex Tax: CHF15.63

PLA+ Gold Filament 1.75mm 1Kg eSun

PLA+ Gold Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Silk Dark Yellow Filament 1.75mm 1Kg eSun

PLA Silk Dark Yellow Filament 1.75mm 1Kg eSun

The eSilk-PLA Dark Yellow has been specifically developed to achieve particularly smooth and shiny s..

CHF13.90 Ex Tax: CHF12.86

PLA Matte Almond Yellow Filament 1.75mm 1Kg eSun

PLA Matte Almond Yellow Filament 1.75mm 1Kg eSun

ePLA-Matte Almond Yellow is a PLA based filament from eSun. eSun's ePla-Matte series combines the ex..

CHF13.90 Ex Tax: CHF12.86

PLA+HS Yellow High Speed Filament 1.75mm 1Kg eSun

PLA+HS Yellow High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Gold High Speed Filament 1.75mm 1Kg eSun

PLA+HS Gold High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+ CMYK Filament Hueforge Kit 1.75mm 4x1Kg eSun

PLA+ CMYK Filament Hueforge Kit 1.75mm 4x1Kg eSun

The PLA+ CMYK Filament Hueforge Kit from eSun offers a versatile and creative way to design your 3D ..

CHF55.90 Ex Tax: CHF51.71

PLA Hyper Yellow Filament 1.75mm 1Kg Creality

PLA Hyper Yellow Filament 1.75mm 1Kg Creality

The Creality PLA Hyper Filament enables ultra-fast print speeds of up to 600 mm/s, significantly acc..

CHF20.90 Ex Tax: CHF19.33

PLA+ Yellow CMYK Filament Hueforge 1.75mm 1Kg eSun

PLA+ Yellow CMYK Filament Hueforge 1.75mm 1Kg eSun

PLA+ CMYK from eSun is made for Hueforge. The software turns an image into a flat relief of thin col..

CHF14.90 Ex Tax: CHF13.78

PLA+ Almond Yellow Filament 1.75mm 1Kg eSun

PLA+ Almond Yellow Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Yellow Refill Filament 1.75mm 1Kg eSun

PLA+ Yellow Refill Filament 1.75mm 1Kg eSun

Discover the sustainable and high-quality PLA+ Refill Filament from eSun with a 1.75mm diameter – no..

CHF13.50 Ex Tax: CHF12.49

PLA Hyper RFID Gold Filament 1.75mm 1Kg Creality

PLA Hyper RFID Gold Filament 1.75mm 1Kg Creality

With the PLA Hyper RFID Filament from Creality, you experience 3D printing in a new dimension. This ..

CHF23.90 Ex Tax: CHF22.11

PLA Hyper RFID Yellow Filament 1.75mm 1Kg Creality

PLA Hyper RFID Yellow Filament 1.75mm 1Kg Creality

With the PLA Hyper RFID filament from Creality, you experience 3D printing in a new dimension. This ..

CHF25.90 Ex Tax: CHF23.96

PLA Basic Yellow Refill Filament 1.75mm 1Kg eSun

PLA Basic Yellow Refill Filament 1.75mm 1Kg eSun

Are you looking for a high-quality filament for your 3D printer that is reliable, environmentally fr..

CHF11.40 Ex Tax: CHF10.55

PolyTerra PLA Savannah Yellow Filament 1.75mm 1Kg

PolyTerra PLA Savannah Yellow Filament 1.75mm 1Kg

PolyTerra PLA is a very easy-to-print filament that enables both beginners and experienced users to ..

CHF14.90 Ex Tax: CHF13.78

HT-PLA Yellow Filament 1.75mm 1Kg Polymaker

HT-PLA Yellow Filament 1.75mm 1Kg Polymaker

Polymaker HT-PLA is a very easy-to-print high-temperature filament that ensures reliable results for..

CHF21.90 Ex Tax: CHF20.26

Panchroma PLA Yellow Filament 1.75mm 1Kg

Panchroma PLA Yellow Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for daily use and is suit..

CHF18.90 Ex Tax: CHF17.48

HT-PLA Yellow Filament 1.75mm 1Kg R3D

HT-PLA Yellow Filament 1.75mm 1Kg R3D

The HT-PLA Yellow Filament by R3D is a high-temperature-resistant PLA filament with a diameter of 1...

CHF19.90 Ex Tax: CHF18.41

Tags: Yellow, yellow, PLA+175Y1, Esun, PLA, PLA+, Plus, Filament, 1.75, Printer, 3D Printer, Landi, Landi Filament, FDM, Plastic