PLA+ Blue Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eSun it is considerably stronger and tougher than standard PLA and less likely to break, yet just as easy to print. Parts come out with smooth surfaces and clean layer lines and stand up well to everyday use. Whether prototype, bracket, enclosure or figure: PLA+ is a safe choice for almost any project and also runs reliably on fast printers. The spool holds 1 kg of 1.75 mm filament in the colour Blue. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.
Recommended Accessories:
- Filament dryers (dry box): all models in our shop
- Filament Vacuum Set Pro 3 eVacuum by eSun
- 5 Pcs. Filament Vacuum Bags Pro 3 from eSun
- 1 Liter Isopropyl Alcohol/Isopropanol 99.8%
- 3DLac Adhesive Spray 400ml
Features:
- Tough and hard to break, according to eSun considerably stronger than standard PLA
- Easy to print, smooth surface and clean layer lines
- Also runs very well on fast printers: up to 300 mm/s, a speed rarely used in practice
- Holds up outdoors, but may fade over time in strong sunlight. Softens from about 53 °C
- If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
- Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
- Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
- Vacuum-packed with desiccant
Application Examples:
- Prototypes and functional samples
- Mechanical parts such as brackets, housings and covers
- Cosplay parts and props
- Models, figures and decoration
Documentation:
Recommended Print Settings:
- Nozzle temperature: 220 °C (210 to 230 °C)
- Print bed temperature: 55 °C (45 to 60 °C)
- Print bed: PEI (textured)
- Part cooling fan: 100 %
- Print speed: slicer's default profile, up to 300 mm/s
Technical Data:
- Manufacturer: eSun
- Material: PLA+ (enhanced PLA)
- Colour: Blue
- Filament diameter: 1.75 mm
- Tolerance: ±0.05 mm
- Filament weight: 1 kg
- Density: 1.24 g/cm³
- Melt flow index: 3.7 g/10 min (190 °C / 2.16 kg)
- Heat deflection temperature: 53.78 °C (0.45 MPa)
- Tensile strength: 70.37 MPa (X-Y), 36.36 MPa (Z)
- Elongation at break: 4.14 % (X-Y), 2.92 % (Z)
- Flexural strength: 100.3 MPa (X-Y), 56.4 MPa (Z)
- Flexural modulus: 3259.39 MPa (X-Y), 2873.94 MPa (Z)
- Izod impact strength: 7.27 kJ/m² (X-Y), 2.22 kJ/m² (Z)
- Spool: cardboard
- Spool outer diameter: 200 mm
- Spool hole diameter: 55 mm
- Spool width: 62 mm
- Gross weight: 1303 g
Scope of Delivery:
- 1× PLA+ filament Blue, 1.75 mm, 1 kg on cardboard spool
PLA+ Blue Filament 1.75mm 1Kg eSun
- Brand: eSUN
- Product Code: 420907
- Availability: Out Of Stock
-
CHF14.90
- Ex Tax: CHF13.78
Related Products
PLA+ Dark Blue Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA Silk Blue Filament 1.75mm 1Kg eSun
The eSilk-PLA Blue has been specially developed to achieve particularly smooth and shiny surfaces on..
CHF16.90 Ex Tax: CHF15.63
PLA+HS Blue High Speed Filament 1.75mm 1Kg eSun
PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..
CHF16.90 Ex Tax: CHF15.63
PLA+HS Dark Blue High Speed Filament 1.75mm 1Kg eSun
PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..
CHF16.90 Ex Tax: CHF15.63
PLA Hyper Blue Filament 1.75mm 1Kg Creality
The Creality PLA Hyper Filament allows you ultra-fast printing speeds of up to 600 mm/s, significant..
CHF20.90 Ex Tax: CHF19.33
PLA Basic Blue Filament 1.75mm 1Kg eSun
With eSun's PLA Basic Filament, you get a cost-effective yet high-quality print material that is spe..
CHF11.90 Ex Tax: CHF11.01
PLA+ Fume Blue Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA+ RGB Blue Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA Basic Blue Refill Filament 1.75mm 1Kg eSun
Are you looking for a high-quality filament for your 3D printer that is reliable, environmentally fr..
CHF11.40 Ex Tax: CHF10.55
PLA Hyper RFID Blue Filament 1.75mm 1Kg Creality
With the PLA Hyper RFID filament from Creality, you will experience 3D printing in a new dimension. ..
CHF25.90 Ex Tax: CHF23.96
PolyTerra PLA Sapphire Blue Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that allows both beginners and experienced users to a..
CHF14.90 Ex Tax: CHF13.78
HT-PLA Blue Filament 1.75mm 1Kg Polymaker
Polymaker HT-PLA is a very easy-to-print high-temperature filament, allowing both beginners and prof..
CHF21.90 Ex Tax: CHF20.26
Panchroma PLA Azure Blue Filament 1.75mm 1Kg
The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for daily use and is suit..
CHF18.90 Ex Tax: CHF17.48
Panchroma PLA Stone Blue Filament 1.75mm 1Kg
The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..
CHF18.90 Ex Tax: CHF17.48
Panchroma PLA Blue Filament 1.75mm 1Kg
The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..
CHF18.90 Ex Tax: CHF17.48
PLA+HS RGB Blue High Speed Filament 1.75mm 1Kg eSun
PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..
CHF16.90 Ex Tax: CHF15.63
Tags: Blue, blue, PLA+175U1, Esun, PLA, PLA+, Plus, Filament, 1.75, Printer, 3D printer, FDM, Landi, Landi Filament, Plastic






















