PLA+ Olive Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eSun it is considerably stronger and tougher than standard PLA and less likely to break, yet just as easy to print. Parts come out with smooth surfaces and clean layer lines and stand up well to everyday use. Whether prototype, bracket, enclosure or figure: PLA+ is a safe choice for almost any project and also runs reliably on fast printers. The spool holds 1 kg of 1.75 mm filament in the colour Olive Green. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

More colours PLA+:
                                                                                                   


Recommended Accessories:


Features:

  • Tough and hard to break, according to eSun considerably stronger than standard PLA
  • Easy to print, smooth surface and clean layer lines
  • Also runs very well on fast printers: up to 300 mm/s, a speed rarely used in practice
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 53 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Mechanical parts such as brackets, housings and covers
  • Cosplay parts and props
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI (textured)
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 300 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+ (enhanced PLA)
  • Colour: Olive Green
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 3.7 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 53.78 °C (0.45 MPa)
  • Tensile strength: 70.37 MPa (X-Y), 36.36 MPa (Z)
  • Elongation at break: 4.14 % (X-Y), 2.92 % (Z)
  • Flexural strength: 100.3 MPa (X-Y), 56.4 MPa (Z)
  • Flexural modulus: 3259.39 MPa (X-Y), 2873.94 MPa (Z)
  • Izod impact strength: 7.27 kJ/m² (X-Y), 2.22 kJ/m² (Z)
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+ filament Olive Green, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+ Olive Green Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 421492
  • Availability: Out Of Stock
  • CHF14.90

  • Ex Tax: CHF13.78

Related Products

PLA+ Green Filament 1.75mm 1Kg eSun

PLA+ Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Pine Green Filament 1.75mm 1Kg eSun

PLA+ Pine Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Silk Lime Filament 1.75mm 1Kg eSun

PLA Silk Lime Filament 1.75mm 1Kg eSun

The eSilk-PLA Lime Neon Green was specially developed to achieve particularly smooth and glossy surf..

CHF13.90 Ex Tax: CHF12.86

PLA Matte Morandi Green Filament 1.75mm 1Kg eSun

PLA Matte Morandi Green Filament 1.75mm 1Kg eSun

ePLA-Matte Morandi Green is a PLA-based filament from eSun. The ePla-Matte series from eSun com..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF12.90 Ex Tax: CHF11.93

PLA+HS Pine Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Pine Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Olive Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Olive Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+ Holly Green Filament 1.75mm 1Kg eSun

PLA+ Holly Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Basic Olive Green Refill Filament 1.75mm 1Kg eSun

PLA Basic Olive Green Refill Filament 1.75mm 1Kg eSun

Are you looking for a high-quality filament for your 3D printer that is reliable, environmentally fr..

CHF11.40 Ex Tax: CHF10.55

PolyTerra PLA Forest Green Filament 1.75mm 1Kg

PolyTerra PLA Forest Green Filament 1.75mm 1Kg

PolyTerra PLA is a very easy-to-print filament that provides reliable results for both beginners and..

CHF14.90 Ex Tax: CHF13.78

Panchroma PLA Dark Olive Drab Filament 1.75mm 1Kg

Panchroma PLA Dark Olive Drab Filament 1.75mm 1Kg

Polymaker's Panchroma Basic PLA is a versatile 3D printing filament for everyday use and is suitable..

CHF18.90 Ex Tax: CHF17.48

Panchroma PLA Olive Green Filament 1.75mm 1Kg

Panchroma PLA Olive Green Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for daily use and is suit..

CHF18.90 Ex Tax: CHF17.48

PLA+HS Jade Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Jade Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

Tags: Olives, Olive, Green, Army, Esun, PLA, PLA+, Plus, Filament, 1.75, Printer, 3D Printer, Landi, Landi Filament, FDM, Plastic, PLA+175OG1