PLA+ Bone White Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eSun it is considerably stronger and tougher than standard PLA and less likely to break, yet just as easy to print. Parts come out with smooth surfaces and clean layer lines and stand up well to everyday use. Whether prototype, bracket, enclosure or figure: PLA+ is a safe choice for almost any project and also runs reliably on fast printers. The spool holds 1 kg of 1.75 mm filament in the colour Bone White. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.
Recommended Accessories:
- Filament dryers (dry box): all models in our shop
- Filament Vacuum Set Pro 3 eVacuum by eSun
- 5 Pcs. Filament Vacuum Bags Pro 3 from eSun
- 1 Liter Isopropyl Alcohol/Isopropanol 99.8%
- 3DLac Adhesive Spray 400ml
Features:
- Tough and hard to break, according to eSun considerably stronger than standard PLA
- Easy to print, smooth surface and clean layer lines
- Also runs very well on fast printers: up to 300 mm/s, a speed rarely used in practice
- Holds up outdoors, but may fade over time in strong sunlight. Softens from about 53 °C
- If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
- Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
- Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
- Vacuum-packed with desiccant
Application Examples:
- Prototypes and functional samples
- Mechanical parts such as brackets, housings and covers
- Cosplay parts and props
- Models, figures and decoration
Documentation:
Recommended Print Settings:
- Nozzle temperature: 220 °C (210 to 230 °C)
- Print bed temperature: 55 °C (45 to 60 °C)
- Print bed: PEI (textured)
- Part cooling fan: 100 %
- Print speed: slicer's default profile, up to 300 mm/s
Technical Data:
- Manufacturer: eSun
- Material: PLA+ (enhanced PLA)
- Colour: Bone White
- Filament diameter: 1.75 mm
- Tolerance: ±0.05 mm
- Filament weight: 1 kg
- Density: 1.24 g/cm³
- Melt flow index: 3.7 g/10 min (190 °C / 2.16 kg)
- Heat deflection temperature: 53.78 °C (0.45 MPa)
- Tensile strength: 70.37 MPa (X-Y), 36.36 MPa (Z)
- Elongation at break: 4.14 % (X-Y), 2.92 % (Z)
- Flexural strength: 100.3 MPa (X-Y), 56.4 MPa (Z)
- Flexural modulus: 3259.39 MPa (X-Y), 2873.94 MPa (Z)
- Izod impact strength: 7.27 kJ/m² (X-Y), 2.22 kJ/m² (Z)
- Spool: cardboard
- Spool outer diameter: 200 mm
- Spool hole diameter: 55 mm
- Spool width: 62 mm
- Gross weight: 1303 g
Scope of Delivery:
- 1× PLA+ filament Bone White, 1.75 mm, 1 kg on cardboard spool
PLA+ Bone White Filament 1.75mm 1Kg eSun
- Brand: eSUN
- Product Code: 421494
- Availability: Out Of Stock
-
CHF14.90
- Ex Tax: CHF13.78
Related Products
PLA+ White Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA+ Cold White Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA+ White Filament 1.75mm 5Kg eSun
This XXL 5Kg roll of PLA Plus white by eSun is based on a standard PLA filament. The following..
CHF64.90 Ex Tax: CHF60.04
PLA+ White Filament 1.75mm 3Kg eSun
This XXL 3Kg roll of PLA Plus white from eSun is based on a standard PLA filament. The following pro..
CHF39.90 Ex Tax: CHF36.91
PLA Natural Filament 1.75mm 1Kg eSun
The eSUN Filament PLA Natural is a high-quality, environmentally friendly, and user-friendly 3D prin..
CHF12.90 Ex Tax: CHF11.93
PLA+ Cold White Filament 1.75mm 3Kg eSun
This XXL 3Kg roll of eSun’s Cold White PLA Plus is based on a standard PLA filament and has optimize..
CHF39.90 Ex Tax: CHF36.91
PLA+ Cold White Filament 1.75mm 5Kg eSun
This XXL 5Kg roll of PLA Plus in Cold White by eSun is based on standard PLA filament. The following..
CHF64.90 Ex Tax: CHF60.04
PLA+HS Bone White High Speed Filament 1.75mm 1Kg eSun
PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..
CHF12.90 Ex Tax: CHF11.93
PLA+ Light Khaki Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA+ Milky White Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA Basic Bone White Filament 1.75mm 1Kg eSun
With eSun's PLA Basic Filament, you get an affordable yet high-quality printing material that is spe..
CHF11.90 Ex Tax: CHF11.01
PLA Basic Bone White Refill Filament 1.75mm 1Kg eSun
Are you looking for a high-quality filament for your 3D printer that is reliable, environmentally fr..
CHF11.40 Ex Tax: CHF10.55
PLA+HS Light Khaki High Speed Filament 1.75mm 1Kg eSun
PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..
CHF16.90 Ex Tax: CHF15.63
Tags: White, Bone, Bone White, Bone Color, Bone, Esun, PLA, PLA+, Plus, Filament, 1.75, Printer, Landi, Landi Filament, 3D Printer, FDM, Plastic, PLA+175BW1



















