DIAMOND dichtol AM Macro 250ml Sealant FDM 3D Printing

DIAMANT dichtol AM Makro is a ready-to-use, solvent-based polymer system for sealing additively manufactured components. Unlike the standard variant, Makro is particularly suitable for larger pores in the range of 0.1 to 0.5 mm, as often encountered in FDM 3D printing. The sealer penetrates the material through capillary action and seals the components against various liquids and gases. The single-component system requires no mixing and is suitable for all common printing methods and printing materials. Application is done by dipping, brushing, spraying, or injecting, depending on the size and accessibility of the surfaces to be sealed. After curing, the seal is colorless, permanently temperature resistant up to 300 °C, and meets the drinking water compliance according to KTW-BWGL of the German Environment Agency.

Recommended Accessories:

• Nitrile Protective Gloves XL 100 Pack

Properties:

• Ready-to-use, solvent-based single-component system, specially tailored for larger pores in FDM printing
• Infiltration by capillary action seals the component pore-deep against liquids and gases
• Pore sizes from 0.1 to 0.5 mm are reliably sealed, suitable for the respective printing method
• Fast curing at room temperature makes oven curing unnecessary
• Temperature resistance of the cured seal is permanently 300 °C
• Drinking water compliance according to KTW-BWGL and good overpaintability with solvent-free paints are given

Application Examples:

• Sealing of 3D-printed housings, containers, and tanks against liquids and gases
• Waterproof sealing of functional FDM components for outdoor use
• Sealing of prototypes and functional models to increase mechanical strength
• Protection of surfaces against contamination and the influence of media

Documentation:

• Data Sheet (PDF)

Hazard Notices:

• Signal word: Danger
• GHS02 Flammable
• GHS07 Warning
• GHS08 Health Hazard
• H225 Highly flammable liquid and vapor
• H304 May be fatal if swallowed and enters airways
• H336 May cause drowsiness or dizziness
• EUH066 Repeated exposure may cause skin dryness or cracking

Technical Data:

• Manufacturer: DIAMANT Polymer GmbH
• Manufacturer SKU: 2569
• EAN: 4262367790499
• Product Type: solvent-based, for larger pores
• Color shade as delivered: colorless
• Color shade when cured: colorless
• Density: 0.90 g/cm³
• Viscosity: 40 – 60 mPas
• Suitable for pore size: 0.1 – 0.5 mm
• Dry film thickness: 10 – 15 µm
• Curing surface dry (20 °C): 6 min
• Full curing (20 °C): 24 h
• Application temperature: up to 40 °C
• Permanent temperature resistance: 300 °C
• Short-term temperature resistance: 350 °C
• Yield: 1 L for 10 m²
• Shelf life unopened: 5 years
• Storage: +5 °C to +30 °C, dry and frost-free
• Fill quantity: 250 ml
• Packaging dimensions: 135 × 61 × 61 mm
• Gross weight: 264 g

Delivery Contents:

• 1× DIAMANT dichtol AM Makro 250 ml