DIAMOND dichtol AM 250ml Sealant for fine pores

DIAMOND dichtol AM UV-Protection is a ready-to-use, solvent-based polymer system for sealing additively manufactured components with additional UV protection. The sealer protects the printing material and underlying colors from the effects of UV radiation, preventing yellowing and fading. At the same time, it seals the components through capillary action against various liquids and gases. The one-component system requires no mixing and is suitable for all common printing methods and materials. Application is done by dipping, brushing, spraying, or injecting, depending on the size and accessibility of the surfaces to be sealed. After curing, the seal is colorless and permanently resistant to temperatures up to 200 °C.

Recommended Accessories:

• Nitrile Protective Gloves XL 100-Pack

Features:

• Ready-to-use, solvent-based one-component system with integrated UV protection, requires no mixing
• Infiltration through capillary action seals the component pore-deep against liquids and gases
• Pore size from 0.1 to 0.5 mm is reliably sealed, suitable for the respective printing process
• Fast curing at room temperature makes oven curing unnecessary
• Temperature resistance of the cured seal is permanently up to 200 °C
• UV protection preserves printing materials and colors from yellowing and fading due to UV radiation

Application Examples:

• Sealing of 3D-printed housings, containers, and tanks against liquids and gases
• Waterproof sealing of functional FDM components for outdoor use
• Sealing of prototypes and functional models to increase mechanical strength
• Protection of surfaces from contamination and the influence of media

Documentation:

• Data Sheet (PDF)

Hazard Warnings:

• Signal word: Danger
• GHS02 Flammable
• GHS07 Attention
• GHS08 Health hazard
• H225 Highly flammable liquid and vapor
• H304 May be fatal if swallowed and enters airways
• H336 May cause drowsiness or dizziness
• EUH066 Repeated exposure may cause skin dryness or cracking

Technical Data:

• Manufacturer: DIAMANT Polymer GmbH
• Manufacturer SKU: 2546
• EAN: 4262367790239
• Product type: solvent-based, with UV protection
• Color tone in delivery state: colorless
• Color tone after curing: colorless
• Density: 0.91 g/cm³
• Viscosity: 30 – 50 mPas
• Suitable for pore size: 0.1 – 0.5 mm
• Dry layer thickness: 8 – 15 µm
• Curing surface dry (20 °C): 6 min
• Full curing (20 °C): 24 h
• Application temperature: up to 40 °C
• Permanent temperature resistance: 200 °C
• Coverage: 1 L for 10 m²
• Shelf life unopened: 2 years
• Storage: +5 °C to +30 °C, dry and frost-free
• Filling quantity: 250 ml
• Package dimensions: 135 × 61 × 61 mm
• Gross weight: 274 g

Scope of Delivery:

• 1× DIAMOND dichtol AM UV-Protection 250 ml