DIAMOND dichtol AM Spray 500ml sealant fine pores

DIAMANT dichtol AM Spray is a ready-to-use, solvent-based polymer system for sealing additively manufactured components and is supplied as a ready-to-use spray can with 500 ml. The sealer is particularly suitable for fine pores with a size of up to 0.1 mm and seals 3D-printed components against various liquids and gases. The single-component system requires no mixing and is suitable for all common printing processes and printing materials. The spray can enables even application on large surfaces. Once cured, the seal is colorless, permanently temperature resistant up to 300 °C and fulfills the drinking water compliance according to KTW-BWGL of the Federal Environment Agency.

Recommended accessories:

• Nitrile Protective Gloves XL 100 Pack

Features:

• Ready-to-use 500 ml spray can enables even application without additional tools
• Infiltration by capillary effect seals the component thoroughly against liquids and gases
• Pore size from 0 to 0.1 mm is reliably sealed, suitable for the respective printing process
• Fast curing at room temperature makes oven curing unnecessary
• Temperature resistance of the cured seal is permanently 300 °C
• Drinking water compliance according to KTW-BWGL and good overpaintability with solvent-free paints are provided

Application examples:

• Sealing of 3D-printed housings, containers, and tanks against liquids and gases
• Waterproof sealing of functional FDM components for outdoor use
• Sealing of prototypes and functional models to increase mechanical strength
• Protection of surfaces against contamination and media influence

Documentation:

• Data Sheet (PDF)

Hazard warnings:

• Signal word: Danger
• GHS02 Flammable
• GHS07 Attention
• H222 Extremely flammable aerosol
• H229 Pressurized container: may burst if heated
• H336 May cause drowsiness and dizziness
• EUH066 Repeated exposure may cause skin dryness or cracking

Technical data:

• Manufacturer: DIAMANT Polymer GmbH
• Manufacturer SKU: 2568
• EAN: 4262367790086
• Product type: solvent-based, for fine pores, spray can
• Color in delivery condition: colorless
• Color when cured: colorless
• Density: 0.88 g/cm³
• Viscosity: 15 – 30 mPas
• Suitable for pore size: 0 – 0.1 mm
• Dry layer thickness: 4 µm
• Curing surface dry (20 °C): 6 min
• Curing fully (20 °C): 24 h
• Processing temperature: up to 40 °C
• Temperature resistance permanently: 300 °C
• Temperature resistance short-term: 350 °C
• Yield: 1 L for 20 m²
• Shelf life unopened: 5 years
• Storage: +5 °C to +30 °C, dry and frost-free
• Filling quantity: 500 ml spray can
• Packaging dimensions: 240 × 65 × 65 mm
• Gross weight: 468 g

Scope of delivery:

• 1× DIAMANT dichtol AM Spray 500 ml spray can