DFRobot TF-Luna ToF Micro Single-point Ranging LiDAR

The TF-Luna from Benewake is a LiDAR that determines the distance to a point by time-of-flight measurement (ToF). It measures from 0.2 to 8 m with 1 cm resolution and up to 100 times per second. The data comes via UART or I2C with 3.3 V level, the supply needs 5 V. This makes it work with Arduino, Raspberry Pi, ESP32, ESP8266 and STM32.

Recommended Accessories:

• Dupont Jumper Cable Set 20cm 60 Pieces.

Features:

• Range 0.2 to 8 m, resolution 1 cm, up to 100 measurements per second
• Narrow measuring cone of 2°
• UART or I2C, selected with pin 5 at power-up
• Immune to ambient light up to 70 klux
• Power consumption up to 0.35 W

Application Examples:

• Obstacle detection for robots
• Altitude measurement for drones
• Detecting fill level and presence

Documentation:

• Datasheet (PDF)
• Product manual (PDF)
• Waveshare Wiki TF-Luna with pinout and examples

Technical Data:

• Manufacturer: DFRobot, sensor by Benewake
• Manufacturer SKU: SEN0340
• Supply: 5 V (DFRobot: 5 V ±0.1 V)
• Data level: 3.3 V
• Pins: 1 +5V, 2 RXD/SDA, 3 TXD/SCL, 4 GND, 5 interface selection, 6 multiplexed output
• Pin 5 at GND at power-up: I2C, address 0x10. Pin 5 open or at 3.3 V: UART, 115200 baud
• Measuring range: 0.2 to 8 m
• Resolution: 1 cm
• Measuring rate: 100 Hz
• Accuracy: ±6 cm from 0.2 to 3 m
• Field of view: 2°
• Ambient light: up to 70 klux
• Cable length: 30 cm
• Dimensions: 35 × 21.25 × 13.5 mm
• Sensor weight: below 5 g

Scope of Delivery:

• 1× DFRobot TF-Luna ToF LiDAR
• 1× Connection cable