Resin Water Washable Yellow 0.5Kg UV 405nm eSun

The yellow Water Washable Resin from eSun can be cleaned with water after printing, isopropanol as with standard resin is not needed. It cures at 395 to 410 nm and is suitable for LCD and DLP printers with UV light. The resin comes in a light-tight aluminium bottle.

Recommended Accessories:

• Nitrile Protective Gloves L 100-pack
• Creality Resin Filter 20 Pieces

Features:

• Cleaning of printed parts with water
• Low odour
• For LCD and DLP printers with a wavelength of 395 to 410 nm
• Hardness 76 Shore D
• Shake before use, not too hard so that no air bubbles form
• Avoid direct sunlight during processing
• After printing, clean under running water and let air dry
• Finally post-cure under UV light, with UV LEDs or about 2 to 3 hours in sunlight

Application Examples:

• Figures, models and prototypes with fine details
• Printing without isopropanol

Documentation:

• Water Washable Resin instructions (PDF)

Technical Data:

• Manufacturer: eSun
• Type: eResin-LC1000 Water Washable, Y05
• Colour: yellow
• Contents: 0.5 kg
• Curing wavelength: 395 to 410 nm
• Density: 1.05 to 1.25 g/cm³
• Viscosity at 25 °C: 100 to 200 mPa·s
• Flexural strength: 68 MPa
• Flexural modulus: 900 to 1400 MPa
• Tensile strength: 45 to 70 MPa
• Elongation at break: 5 to 10 %
• Hardness: 76 Shore D
• IZOD impact strength: 18 to 39 J/m
• Storage temperature: 15 to 35 °C
• Processing according to the bottle: 20 to 28 °C, dry, protected from light

Scope of Delivery:

• 1× Resin Water Washable yellow 0.5 kg eSun