eResin-PLA Pro Yellow 0.5Kg UV405nm eSun

eResin-PLA Pro Yellow is a PLA Polyol synthesized UV-Resin from eSun. The resin is made from organic compounds like PLA, making it very odorless compared to conventional resin. The eResin-PLA Pro impresses with high strength, resolution and excellent value for money. The resin is compatible with mono and multicolor displays and is suitable for small delicate models as well as larger ones. With its top value for money and neutral smell, we recommend the eResin-PLA Pro as the perfect entry-level resin, or as the inexpensive all-rounder for experienced resin printing. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended Accessories:

• Nitrile Gloves L 100 Pack
• Creality Resin Filter 20 Pieces
• 1 Liter Isopropyl Alcohol / Isopropanol 99.8%

Features eResin-PLA Pro: 

• Best value for money among all resins for DLP and LCD printers. 
  
• Organic PLA Polyol synthesized UV-Resin 
  
• Specially developed for LCD/LED SLA printers to achieve the best print quality. 
  
• The resin is compatible with all LCD printers with a wavelength of 405nm. 
  
• Odorless 
  
• High strength  
  
• Smooth printing surface 
  
• High resolution  

Application, important information: 

• Shake before use. Not too hard to avoid forming air bubbles. Avoid direct sunlight during application. 
  
• Keep the resin out of reach of children. 
  
• Wear gloves before use to avoid direct contact with the skin. 
  
• Ventilate the room well. 
  
• In case of accidental contact with the skin: Wash immediately with plenty of water. 
  
• Finished printed models must be cleaned with high concentration alcohol (>95%) for about 30 seconds. 
  
• Finally, we recommend you to cure the printed parts under UV light until final strength is achieved. You can use UV-LEDs or alternatively sunlight (2-3h) as UV light source. 

Download: 

• Safety Data Sheet 
  
• Technical Data Sheet eResin-PLA Pro
  
• Print Parameters eResin-PLA Pro

Technical Details: 

• Manufacturer: eSun 
  
• Type: eResin-PLA Pro 
  
• Color: Yellow
  
• Manufacturer SKU: ERESINPLAPRO-Y05
  
• Viscosity: 200-300mPa*s 
  
• Density: 1.1g/cm3 
  
• Tensile strength: 37-48MPa 
  
• Elongation at break: 25-28% 
  
• Bending strength: 36-49MPa 
  
• Impact strength: 32-36J/m 
  
• Hardness (Shore D): 78-80 
  
• Resin Weight: 500g

Package Contents:  

• 1x eResin-PLA Pro Yellow 0.5Kg UV405nm eSun