eResin-PLA Pro Orange 1Kg UV405nm eSun

eResin-PLA Pro Orange is a UV-resin synthesized from PLA polyol by eSun. The resin is made from organic compounds like PLA and is therefore very low-odor compared to conventional resin. eResin-PLA Pro provides high strength, resolution and excellent value for money. The resin is compatible with mono and multicolor displays, and is suitable for small, intricate models as well as larger ones. With its top value for money and neutral smell, we recommend eResin-PLA Pro as the perfect beginner's resin, or as the budget all-rounder for experienced resin printers. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended accessories:

• Nitrile protective gloves L 100 pack
• Creality Resin Filter 20 Pieces
• 1 Liter Isopropyl Alcohol / Isopropanol 99.8%

Features of eResin-PLA Pro:

• Best price-performance ratio among all resins for DLP and LCD printers.
  
• Organic PLA polyol synthesized UV resin
  
• Specially developed for LCD/LED SLA printers to achieve the best printing quality.
  
• The resin is compatible with all LCD printers with a wavelength of 405nm.
  
• Odorless
  
• High strength
  
• Smooth printing surface
  
• High resolution
  

Application, important information:

• Shake before use. Not too firmly, so that no air bubbles form. Avoid direct sunlight during application.
  
• Keep the resin out of reach of children.
  
• Wear gloves before use to avoid direct contact with the skin.
  
• Ventilate the room well.
  
• If accidentally comes into contact with skin: rinse immediately with plenty of water.
  
• Finished print models should be cleaned for approximately 30 seconds with concentrated alcohol (>95%).
  
• In conclusion, we recommend that you cure the printed parts under UV light until final strength is achieved. As a UV light source, you can use UV LEDs or alternatively sunlight (2-3h).

Download:

• Safety data sheet
  
• Technical data sheet eResin-PLA Pro
  
• Printing parameters eResin-PLA Pro

Technical details:

• Manufacturer: eSun
  
• Type: eResin-PLA Pro
  
• Color: Orange
  
• Manufacturer SKU: ERESINPLAPRO-O
  
• Viscosity: 200-300mPa*s
  
• Density: 1.1g/cm3
  
• Tense Strength: 37-48MPa
  
• Break Deformation: 25-28%
  
• Bending Strength: 36-49MPa
  
• Impact Toughness: 32-36J/m
  
• Hardness (Shore D): 78-80
  
• Weight resin: 1000g

Package Contains:

• 1x eResin-PLA Pro Orange 1Kg UV405nm eSun