eResin-PLA Pro Yellow 1Kg UV405nm eSun

eResin-PLA Pro Yellow is a PLA polyol synthesized UV resin from eSun. The resin is made from organic compounds like PLA, and is therefore very odourless compared to conventional resin. The eResin-PLA Pro impresses with its high strength, resolution, and excellent value for money. The resin is compatible with mono and multicolour displays and is suitable for small, filigree models as well as larger models. With its top price-performance ratio and neutral smell, we recommend eResin-PLA Pro as the perfect beginner's resin, or as the inexpensive all-rounder for those experienced in resin printing. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended Accessories:

• Nitrile Protective Gloves L 100 Pack
• Creality Resin Filter 20 Pieces
• 1 Liter Isopropyl Alcohol / Isopropanol 99.8%

eResin-PLA Pro features: 

• Best value for money among all resins for DLP and LCD printers. 
  
• Organic PLA polyol synthesized UV resin 
  
• Specially developed for LCD/LED SLA printers to achieve the best print quality. 
  
• The resin is compatible with all LCD printers with 405nm wavelength. 
  
• Odourless 
  
• High strength  
  
• Smooth printing surface 
  
• High resolution  

Application, important information: 

• Shake before use. Not too firmly, so that no air bubbles form. Avoid direct sunlight during application. 
  
• Keep the resin away from children. 
  
• Wear gloves before use to avoid direct contact with skin. 
  
• Ventilate the room well. 
  
• In case of accidental contact with skin: Wash immediately with plenty of water. 
  
• Finished printed models must be cleaned with high-concentrated alcohol (>95%) for about 30 seconds. 
  
• Finally, we recommend that you cure the printed parts under UV light until the final strength is achieved. You can use UV LEDs or alternatively sunlight (2-3h) as a UV light source. 

Download: 

• Safety data sheet 
  
• Technical data sheet eResin-PLA Pro
  
• Print parameters eResin-PLA Pro

Technical Details: 

• Manufacturer: eSun 
  
• Type: eResin-PLA Pro 
  
• Colour: Yellow
  
• Manufacturer SKU: ERESINPLAPRO-Y
  
• Viscosity: 200-300mPa*s 
  
• Density: 1.1g/cm3 
  
• Tensile strength: 37-48MPa 
  
• Elongation at break: 25-28% 
  
• Bending strength: 36-49MPa 
  
• Impact resistance: 32-36J/m 
  
• Hardness (Shore D): 78-80 
  
• Resin weight: 1000g

Package Contents:  

• 1x eResin-PLA Pro Yellow 1Kg UV405nm eSun