eResin-PLA Pro Orange 0.5Kg UV405nm eSun

eResin-PLA Pro Orange is a PLA polyol synthesized UV resin from eSun. The resin, like PLA, is made from organic compounds, making it very odorless compared to conventional resin. eResin-PLA Pro impresses with its high strength, resolution, and excellent value for money. The resin is compatible with mono and multicolored displays and is suitable for both small, delicate models and larger ones. With its top price-performance ratio and neutral odor, we recommend eResin-PLA Pro as the perfect beginner resin, or as the affordable all-rounder for experienced resin printers. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended Accessories:

• Nitrile protective gloves L 100 pack
• Creality Resin Filter 20 piece
• 1 Liter of Isopropyl alcohol / Isopropanol 99.8%

Features of eResin-PLA Pro: 

• Best price-performance ratio among all resins for DLP and LCD printers. 
  
• Organic PLA Polyol synthesized UV resin 
  
• Specifically developed for LCD/LED SLA printers to achieve the best print quality. 
  
• The resin is compatible with all LCD printers with a wavelength of 405nm. 
  
• Odorless 
  
• High strength  
  
• Smooth print surface 
  
• High resolution  

Use, important information: 

• Shake before use. Not too hard to prevent air bubbles from forming. Avoid direct sunlight during use. 
  
• Keep resin away from children. 
  
• Wear gloves before use to avoid direct contact with the skin. 
  
• Ventilate the room well. 
  
• In case of accidental contact with the skin: wash immediately with plenty of water. 
  
• Finished printed models must be cleaned with high-concentrate alcohol (>95%) for about 30 seconds. 
  
• Finally, we recommend you to cure the printed parts under UV light until the ultimate strength is achieved. You can use UV LEDs or alternatively sunlight (2-3 hours) as a UV light source. 

Download: 

• Safety data sheet 
  
• Technical data sheet eResin-PLA Pro
  
• Print parameters eResin-PLA Pro

Technical details: 

• Manufacturer: eSun 
  
• Type: eResin-PLA Pro 
  
• Color: Orange
  
• Manufacturer SKU: ERESINPLAPRO-O05
  
• Viscosity: 200-300mPa*s 
  
• Density: 1.1g/cm3 
  
• Tensile strength: 37-48MPa 
  
• Elongation at break: 25-28% 
  
• Flexural strength: 36-49MPa 
  
• Impact resistance: 32-36J/m 
  
• Hardness (Shore D): 78-80 
  
• Resin Weight: 500g

Delivery:  

• 1x eResin-PLA Pro Orange 0.5Kg UV405nm eSun