PLA+HS RGB Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour RGB Green. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.

More colours PLA+HS:
                                                               


Recommended Accessories:


Features:

  • Made for fast printing: up to 350 mm/s, a speed rarely used in practice
  • Flows more easily than standard PLA+ at high speed
  • Good layer adhesion even at high speed, according to eSun
  • Tough, does not break easily according to eSun
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Enclosures and mounts for electronics
  • Several identical parts where print time matters
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 350 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+HS (PLA+ for high print speed)
  • Colour: RGB Green
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 54 °C (0.45 MPa)
  • Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
  • Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
  • Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
  • Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
  • Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
  • Acid and alkali resistant: no
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+HS filament RGB Green, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+HS RGB Green High Speed Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 425554
  • Availability: In Stock
  • CHF16.90

  • Ex Tax: CHF15.63

Related Products

PLA+ Peak Green Filament 1.75mm 1Kg eSun

PLA+ Peak Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Hyper Green Filament 1.75mm 1Kg Creality

PLA Hyper Green Filament 1.75mm 1Kg Creality

The Creality PLA Hyper filament enables ultra-fast print speeds of up to 600 mm/s, significantly acc..

CHF20.90 Ex Tax: CHF19.33

PLA+ Grass Green Filament 1.75mm 1Kg eSun

PLA+ Grass Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Jade Green Filament 1.75mm 1Kg eSun

PLA+ Jade Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ RGB Green Filament 1.75mm 1Kg eSun

PLA+ RGB Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ RGB Green Refill Filament 1.75mm 1Kg eSun

PLA+ RGB Green Refill Filament 1.75mm 1Kg eSun

Discover the sustainable and high-quality PLA+ Refill Filament from eSun with a diameter of 1.75mm –..

CHF11.90 Ex Tax: CHF11.01

PLA Hyper RFID Green Filament 1.75mm 1Kg Creality

PLA Hyper RFID Green Filament 1.75mm 1Kg Creality

With the PLA Hyper RFID Filament from Creality, you experience 3D printing in a new dimension. This ..

CHF25.90 Ex Tax: CHF23.96

HT-PLA Green Filament 1.75mm 1Kg Polymaker

HT-PLA Green Filament 1.75mm 1Kg Polymaker

Polymaker HT-PLA is a very easy-to-print high-temperature filament that provides reliable results fo..

CHF21.90 Ex Tax: CHF20.26

Panchroma PLA Lime Green Filament 1.75mm 1Kg

Panchroma PLA Lime Green Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..

CHF18.90 Ex Tax: CHF17.48

Panchroma PLA Jungle Green Filament 1.75mm 1Kg

Panchroma PLA Jungle Green Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..

CHF18.90 Ex Tax: CHF17.48

Panchroma PLA Green Filament 1.75mm 1Kg

Panchroma PLA Green Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..

CHF18.90 Ex Tax: CHF17.48

PLA+HS Grass Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Grass Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Jade Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Jade Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Mint Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Mint Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

Tags: Esun, ePLA+HS, Speed, affordable, Filament, High, Flow, PLA, 3D printing, Print speed, Print quality, Melt characteristics, Rapid, Prototyping, environmentally friendly, 1.75, Printer, 3D printer, FDM, Plastic, ePLA-HF, ePLA-HS, PLA+, Speed, Quality, inexpensive, 1.75mm, RGB, Green