Gravity ENS160 IAQ Air Quality Sensor Module
The DFRobot Gravity air quality module carries the ScioSense ENS160, a metal oxide (MOX) gas sensor for indoor air. The chip evaluates volatile organic compounds and outputs TVOC, an equivalent CO2 concentration (eCO2) and an air quality index (AQI). eCO2 is a value calculated from the VOC and not a direct CO2 measurement. After a warm-up time of less than 3 minutes the sensor provides usable values, and an automatic baseline correction keeps it stable in continuous operation. The I2C address is selected with a switch.
Recommended alternative for a true CO2 measurement (NDIR): Gravity I2C SCD41 Infrared CO2 Sensor
Note: The connection cable can be converted to male pins with a Dupont cable M-M, so that it also fits an Arduino UNO.
Recommended Accessories:
Features:
- ScioSense ENS160, metal oxide technology with TrueVOC
- Output of TVOC, eCO2 and AQI
- Warm-up time below 3 minutes
- Automatic baseline correction
- I2C address 0x52 or 0x53
- 4-pin Gravity connector, operation at 3.3 V and 5 V
- Libraries for Arduino and Raspberry Pi (Python)
Application Examples:
- Ventilation control and indoor air monitoring
- Air purifiers and home automation
- Building automation and thermostats
- Range hoods and household appliances
Documentation:
- DFRobot Wiki SEN0514
- Library DFRobot_ENS160 on GitHub (Arduino and Python)
- ENS160 datasheet (PDF)
- Schematic (PDF)
Technical Data:
- Manufacturer: DFRobot
- Manufacturer SKU: SEN0514
- Sensor: ScioSense ENS160 (MOX)
- Operating voltage: 3.3 V to 5.5 V
- Operating current: 29 mA
- Warm-up time: below 3 minutes
- Interface: I2C
- I2C address: 0x52, 0x53
- eCO2: 400 to 65000 ppm
- TVOC: 0 to 65000 ppb
- Operating temperature: -40 °C to 85 °C
- Humidity: 5 to 95 % RH
- Connection: 4-pin Gravity (+, -, C, D)
- Mounting holes: Ø 3 mm, spacing 15 mm
- Dimensions: 30 × 22 × 7 mm
- Weight: 12.2 g
Scope of Delivery:
- 1× Gravity ENS160 air quality module
- 1× 4-pin Gravity cable 30 cm (PH2.0 to Dupont female)
Gravity ENS160 IAQ Air Quality Sensor Module
- Brand: DFRobot
- Product Code: 422148
- Availability: In Stock
-
CHF19.90
- Ex Tax: CHF18.41
Related Products
Dupont Cables M-M 10cm 20 Pieces
Dupont cables are used to connect components quickly. They are also known as jumper cables, test cab..
CHF1.90 Ex Tax: CHF1.76
CCS811+BME280 CO2 Air Quality Environmental Sensor
This DFRobot environmental module combines a gas sensor for eCO2 (CO2 equivalent) and TVOC (total vo..
CHF31.90 Ex Tax: CHF29.51
M5Stack TVOC/eCO2 Gas Sensor Unit SGP30
The M5Stack TVOC/eCO2 Unit is a digital gas sensor with the Sensirion SGP30. It measures volatile or..
CHF12.90 Ex Tax: CHF11.93
SCD30 Sensirion CO2 Sensor
The Sensirion SCD30 measures CO2 using the NDIR infrared principle and achieves an accuracy of ±30 p..
CHF45.90 Ex Tax: CHF42.46
Gravity SGP40 Air Quality Sensor
This Gravity module from DFRobot measures volatile organic compounds (VOC) in indoor air with the Se..
CHF16.90 Ex Tax: CHF15.63
Gravity BME680 Environmental Sensor
The Gravity module from DFRobot carries the Bosch BME680 and measures temperature, humidity, air pre..
CHF20.90 Ex Tax: CHF19.33
Indoor ENS160 Air Quality Sensor with I2C
The DFRobot indoor air quality sensor carries the ScioSense ENS160 in a probe housing with a 1 m cab..
CHF33.90 Ex Tax: CHF31.36
BME688 Breakout Humidity, Pressure, Temperature Air Quality Sensor
The Bosch Sensortec BME688 is the successor to the BME680 and offers the same measuring capabilities..
CHF19.90 Ex Tax: CHF18.41
Waveshare BME688 Humidity, Pressure, Temperature, Air Quality Sensor
The BME688 environmental sensor from Waveshare is a versatile environmental sensor that can measure ..
CHF26.90 Ex Tax: CHF24.88
Gravity I2C HUB
The Gravity I2C HUB from DFRobot distributes one I2C bus to up to eight devices. The input is a 4-pi..
CHF3.90 Ex Tax: CHF3.61
SCD40 CO2 Sensor with Temperature and Humidity Sensor
The SCD40 CO2 Breakout Board offers you precise and reliable measurement of carbon dioxide concentra..
CHF25.90 Ex Tax: CHF23.96
Gravity I2C SCD41 Infrared CO2 Sensor
The DFRobot Gravity CO2 sensor carries the Sensirion SCD41 and measures the CO2 concentration direct..
CHF46.90 Ex Tax: CHF43.39
Tags: Gravity, IAQ, Sensor, Air quality, Air Quality, IAQ, TVOC, eCO2, Ventilation, Indoor air, ENS160, ScioSense, I2c, SEN0514, DFRobot, AQI

















