Gravity I2C HUB
The Gravity I2C HUB from DFRobot distributes one I2C bus to up to eight devices. The input is a 4-pin Gravity PH2.0 socket, the eight outputs are pin headers with SDA, SCL, GND and VCC each at 2.54 mm pitch. Gravity modules are connected with Gravity cables, breakout boards with Dupont cables. All outputs are wired in parallel, so each device needs its own I2C address.
Note: The connection cable can be converted to male pins with a Dupont cable M-M, so that it also fits an Arduino UNO.
Recommended Accessories:
- Dupont Cables M-M 10cm 20 Pieces
- Gravity 4pin IIC/I2C/UART Sensor Cable for Arduino 10 Pieces
- Dupont Cable F-F 10cm 20 pieces
Features:
- 8 outputs with SDA, SCL, GND and VCC as 2.54 mm pin headers, colour-coded
- Gravity PH2.0 4-pin input (D, C, −, +)
- Outputs wired in parallel, each device needs its own address
- For Gravity modules and breakout boards
- 4 mounting holes 3.1 mm, spacing 30 × 20 mm
Application Examples:
- Several I2C sensors on one Arduino or Raspberry Pi
- Connecting Gravity modules and breakout boards together
- Weather station with several sensors
Documentation:
Technical Data:
- Manufacturer: DFRobot
- Manufacturer SKU: DFR0759
- Input: Gravity PH2.0 4-pin
- Outputs: 8× SDA, SCL, GND, VCC, 2.54 mm pin headers
- Mounting holes: 3.1 mm, spacing 30 × 20 mm
- Dimensions: 37 × 27 mm
- Weight: 17 g
Scope of Delivery:
- 1× Gravity I2C HUB
- 1× Gravity cable 4-pin PH2.0 to Dupont, 30 cm
Related Products
Dupont Cables M-M 10cm 20 Pieces
Dupont cables are used to connect components quickly. They are also known as jumper cables, test cab..
CHF1,90 Ex Tax: CHF1,76
Dupont Cable F-F 10cm 20 pieces
Dupont cables are used to connect components quickly. They are also known as jumper cables, test cab..
CHF1,90 Ex Tax: CHF1,76
Gravity 4pin IIC/I2C/UART Sensor Cable for Arduino 10 Pieces
These IIC/I2C/UART sensor cables from DFRobot connect IIC/I2C/UART Gravity sensors to an IO Expansio..
CHF8,90 Ex Tax: CHF8,23
Gravity I2C BMI160 6-Axis Motion Sensor with Gyroscope
The Gravity sensor from DFRobot measures motion with the Bosch BMI160, which combines a 16-bit accel..
CHF11,90 Ex Tax: CHF11,01
Gravity I2C SD2405 RTC Module
The Gravity module from DFRobot is an accurate real-time clock (RTC) with the SD2405AL chip. The chi..
CHF11,90 Ex Tax: CHF11,01
Gravity BMP388 Barometric Pressure Sensor
The Gravity barometric pressure sensor from DFRobot measures air pressure and temperature with the B..
CHF9,90 Ex Tax: CHF9,16
Gravity I2C DS1307 RTC Module
The Gravity I2C DS1307 RTC Module from DFRobot is a real-time clock with the DS1307 and an accurate ..
CHF7,90 Ex Tax: CHF7,31
Gravity I2C BME280 Weather Station Sensor Humidity/Pressure/Temperature
This Gravity environmental sensor from DFRobot measures temperature, humidity and air pressure with ..
CHF17,90 Ex Tax: CHF16,56
Gravity BMX160 + BMP388 10 DOF Sensor
The Gravity module from DFRobot combines two Bosch sensors: the BMX160 measures acceleration, angula..
CHF22,90 Ex Tax: CHF21,18
Gravity ENS160 IAQ Air Quality Sensor Module
The DFRobot Gravity air quality module carries the ScioSense ENS160, a metal oxide (MOX) gas sensor ..
CHF19,90 Ex Tax: CHF18,41
Gravity 4pin IIC/I2C/UART PH2.0 to Dupont Male Cable 30cm 10pcs
These DFRobot IIC/I2C/UART sensor cables have a 4-pin PH2.0 housing for Gravity sensors on one side ..
CHF8,90 Ex Tax: CHF8,23
Gravity IO Expansion Shield for FireBeetle 2 (ESP32-E/M0)
The Gravity IO Expansion Shield from DFRobot is built for the FireBeetle 2 boards ESP32-E and M0. It..
CHF6,90 Ex Tax: CHF6,38
Gravity I2C 2-Channel DAC Module 0-10V
The Gravity module from DFRobot with the GP8403 converts values via I2C into two analog voltages of ..
CHF11,90 Ex Tax: CHF11,01
Gravity CH423 I2C 24 Digital IO Port Expander
The Gravity module from DFRobot with the CH423 provides 24 digital ports via I2C: 8 GPIO as input or..
CHF7,90 Ex Tax: CHF7,31
Gravity GP8413 2-Channel I2C to 0-5V/10V DAC Module
The Gravity DAC module from DFRobot uses the GP8413 chip to generate two analog voltages of 0 to 5 V..
CHF19,90 Ex Tax: CHF18,41
BNO055 Intelligent 9-Axis Sensor
This Fermion breakout from DFRobot carries the Bosch BNO055, a 9-axis orientation sensor with accele..
CHF19,90 Ex Tax: CHF18,41
Gravity I2C Address Changer
The DFRobot address shifter uses the LTC4316 to translate the I2C address of a connected sensor in h..
CHF9,90 Ex Tax: CHF9,16
Tags: DFRobot, Gravity, I2C, Hub, Arduino, Raspberry, DFR0759






















