ABS+ Cold White Filament 1.75mm 1Kg eSun

ABS Plus from eSun is an improved ABS filament that prints much better and has a very low warping. ABS+ is for advanced users, is easy to print compared to standard ABS and also offers you good adhesion properties and almost no wrap effect when printing! ABS+ is an alternative to ABS. ABS+ has very good toughness and impact resistance to resist falls, impacts and breaks due to stretching. The printed surface cannot be smoothed afterwards with solvents with ABS+. However, ABS+ can be mechanically post-processed better, for example, with sandpaper.

Features:

• Very durable
• Reliable bed adhesion
• Lower shrinkage rate therefore also low warping
• Optimal layer adhesion
• Good impact strength
• Resistant to many oils

Recommended printing parameters for ABS+:

• Printing temperature: 220-260°C Recommended: 240°C
• Heated bed temperature: 100°C
• Fan speed: 0 to 20% Recommendation: 15% or turned off
• Feed speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Filament Data Sheet

Technical details:

• Color: Cold White 
• Item Number: ABS+175CW1
• Filament Weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 220-260°C
• Density: 1.06g/cm3
• Melt flow index: 15g/10min
• Impact strength: 42kJ/m²
• Elongation at break: 30%
• Tensile strength: 40MPa
• Shape stability: About 90°C
• Spool size outer diameter: 20cm
• Spool width: 6.85cm
• Inner diameter (hole): 5.3cm
• Filament weight: 1000g
• Empty spool weight: 229g
• Total weight: 1423g
• Dimensions: 205 x 215 x75mm

Delivery:

• 1x ABS+ Cold White Filament 1.75mm 1Kg eSun