ABS+ Gray Filament 1.75mm 1Kg eSun

ABS Plus from eSun is an improved ABS filament that prints much better and has very minimal warping. ABS+ is for advanced users, is easier to print compared to standard ABS, and offers you good adhesion properties and almost no warping effect when printing! ABS+ is the alternative to ABS. ABS+ has very good tenacity and impact resistance to withstand falls, impacts, and breakage caused by stretching. The printed surface with ABS+ can't be smoothened afterwards with a solvent. However, ABS+ can be better mechanically processed with, for example, sandpaper.

Features:

• Very resistant
• Reliable bed adhesion
• Lower shrinkage rate thus minimal warping
• Optimal layer adhesion
• Good impact toughness
• Resistant to many oils

Recommended ABS+ print parameters:

• Printing temperature: 220-260°C Recommended: 240°C
• Heated bed temperature: 100°C
• Fan speed: 0 to 20% Recommendation: 15% or off
• Feeding speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Filament Data Sheet

Technical Details:

• Color: Grey
• Item number: ABS+175H1
• Weight of filament: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 220-260°C
• Density: 1.06g/cm3
• Melt flow index: 15g/10min
• Impact resistance: 42kJ/m²
• Elongation at break: 30%
• Tensile strength: 40MPa
• Thermal stability: Approx. 90°C
• Spool size outer diameter: 20cm
• Spool width: 6.85cm
• Inner diameter (hole): 5.3cm
• Weight of filament: 1000g
• Weight of empty spool: 229g
• Total weight: 1423g
• Dimension: 205 x 215 x75mm

What’s included:

• 1x ABS+ Grey Filament 1.75mm 1Kg eSun