ABS+ Orange Filament 1.75mm 1Kg eSun

ABS Plus from eSun is an enhanced ABS filament that prints much better and has very minimal warping. ABS+ is meant for advanced users and is easier to print compared to standard ABS. It provides good adhesion properties and almost no warp effect while printing! ABS+ is the alternative to ABS. ABS+ has excellent toughness and impact resistance to withstand falls, impacts, and stretching breakage. The printed surface cannot be smoothed out using solvents for ABS+, but it can be mechanically post-processed better, e.g., using sandpaper.

Features:

• Very resistant
• Reliable bed adhesion
• Lower shrinkage rate therefore low warping
• Optimal layer adhesion
• Good impact resistance
• Resistant to many oils

Recommended printing parameters for ABS+

• Printing temperature: 220-260°C Recommended: 240°C
• Heated bed temperature: 100°C
• Fan speed: 0 to 20% Recommendation: 15% or off
• Feed rate: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Filament Data Sheet

Technical Details:

• Color: Orange
• Item number: ABS+175O1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 220-260°C
• Density: 1.06g/cm3
• Melt flow index: 15g/10min
• Impact resistance: 42kJ/m²
• Elongation at break: 30%
• Tensile strength: 40MPa
• Thermal stability: Approx. 90°C
• Spool size: 20cm in diameter
• Spool width: 6.85cm
• Inner diameter (hole): 5.3cm
• Filament weight: 1000g
• Empty spool weight: 229g
• Total weight: 1423g
• Dimension: 205 x 215 x75mm

What's in the box:

• 1x ABS+ Orange Filament 1.75mm 1Kg eSun

---