200x200 1.54inch Black / White E-Ink Display

This Waveshare E-Ink / e-paper display module has 1.54 inches, 200 × 200 pixels and an integrated controller that communicates via SPI. Thanks to its extremely low power consumption it is suitable for battery-powered applications. Such displays are also used as price tags in retail, where they run for several years on one battery. This black / white display supports partial updates (0.3 s), the whole display takes about 2 s.


Recommended Accessories:


Features:

  • Level converter on the board, therefore compatible with 3.3 V and 5 V microcontrollers
  • The image remains visible without power supply
  • Power is basically only needed for refreshing
  • Viewing angle over 170°, easy to read even in sunlight
  • SPI interface for Raspberry Pi, Arduino, ESP8266 or ESP32
  • On the board, BS (printed) selects between 4-wire SPI (0) and 3-wire SPI (1)
  • The supplied cable plugs directly onto a Raspberry Pi, for Arduino UNO or a breadboard 8 additional male/male Dupont cables are needed
  • Example code from Waveshare for Arduino, STM32 and Raspberry Pi

Application Examples:

  • Price tags and labels
  • Battery-powered displays for measured values and weather data
  • Status displays that change rarely

Documentation:



Technical Data:

  • Manufacturer: Waveshare
  • Manufacturer SKU: 12955
  • Type: GDEH0154D67
  • Driver IC: SSD1681
  • Operating voltage: 3.3 V / 5 V
  • Interface: 3-wire SPI, 4-wire SPI
  • Connections: VCC, GND, DIN, CLK, CS, DC, RST, BUSY
  • Outer dimensions: 48 × 33 mm
  • Display area: 27.6 × 27.6 mm
  • Pixel pitch: 0.138 × 0.138 mm
  • Resolution: 200 × 200
  • Display colour: Black, white
  • Grey levels: 2
  • Full refresh: 2 s
  • Partial refresh: 0.3 s
  • Refresh power: 26.4 mW (typ.)
  • Standby: <0.017 mW
  • Viewing angle: over 170°
  • Weight: 22 g

Scope of Delivery:

  • 1× 200 × 200 1.54" black / white E-Ink Display
  • 1× Cable PH2.0 to 1×8-pin female Dupont 20 cm

Write a review

Note: HTML is not translated!
    Bad           Good

200x200 1.54inch Black / White E-Ink Display

  • Brand: Waveshare
  • Product Code: 420424
  • Availability: In Stock
  • CHF14.90

  • Ex Tax: CHF13.78

Related Products

296x128 2.9inch 3-Color E-Ink Display

296x128 2.9inch 3-Color E-Ink Display

This Waveshare E-Ink / e-paper display module has 2.9 inches, 296 × 128 pixels and an integrated con..

CHF25.90 Ex Tax: CHF23.96

200x200 1.54inch 3-Color E-Ink Display

200x200 1.54inch 3-Color E-Ink Display

This Waveshare E-Ink / e-paper display module has 1.54 inches, 200 × 200 pixels and an integrated co..

CHF14.90 Ex Tax: CHF13.78

400x300 4.2inch Black / White E-Ink Display

400x300 4.2inch Black / White E-Ink Display

This Waveshare E-Ink / e-paper display module has 4.2 inches, 400 × 300 pixels and an integrated con..

CHF35.00 Ex Tax: CHF32.38

296x128 2.9inch Black / White E-Ink Display

296x128 2.9inch Black / White E-Ink Display

This Waveshare E-Ink / e-paper display module has 2.9 inches, 296 × 128 pixels and an integrated con..

CHF19.90 Ex Tax: CHF18.41

264x176 2.7inch Black/White E-Ink Display Raspberry Pi HAT

264x176 2.7inch Black/White E-Ink Display Raspberry Pi HAT

This Waveshare E-Ink / e-paper display as a HAT has 2.7 inches, 264 × 176 pixels and an integrated c..

CHF24.90 Ex Tax: CHF23.03

250x122 2.13inch Black / White E-Ink Display Raspberry Pi HAT

250x122 2.13inch Black / White E-Ink Display Raspberry Pi HAT

This Waveshare E-Ink / e-paper display as a HAT has 2.13 inches, 250 × 122 pixels and an integrated ..

CHF20.50 Ex Tax: CHF18.96

200x200 1.54inch E-Ink Raw Black / White e-Paper Display

200x200 1.54inch E-Ink Raw Black / White e-Paper Display

This Waveshare E-Ink / e-paper raw panel has 1.54 inches, 200 × 200 pixels and an integrated control..

CHF9.90 Ex Tax: CHF9.16

M5Stack ESP32 Core Ink Development Kit 1.54inch E-Ink Display

M5Stack ESP32 Core Ink Development Kit 1.54inch E-Ink Display

M5 CoreInk is a new E-Ink display in the M5Stack-Cores series. The 200x200Pixel E-Ink display is dri..

CHF29.90 Ex Tax: CHF27.66

128x80 1.02inch Black/White E-Ink Display

128x80 1.02inch Black/White E-Ink Display

This is a 1.02 inch e-Paper display module from Waveshare with an integrated controller. The module ..

CHF16.90 Ex Tax: CHF15.63

296x152 2.66inch Black / White E-Ink Display

296x152 2.66inch Black / White E-Ink Display

This is a 2.66 inch e-Paper display module from Waveshare with integrated controller. The module com..

CHF18.90 Ex Tax: CHF17.48

168x168 1.64inch 4-Color E-Ink Display

168x168 1.64inch 4-Color E-Ink Display

This is a 1.64 inch 4-color E-Paper display module from Waveshare. The display has a resolution of 1..

CHF19.90 Ex Tax: CHF18.41

296x168 2.36inch 4-Color E-Ink Display

296x168 2.36inch 4-Color E-Ink Display

The 2.36-inch e-Paper module from Waveshare is an electronic paper display with a resolution of 296 ..

CHF23.90 Ex Tax: CHF22.11

2.13inch E-Ink Display HAT+ for Raspberry Pi

2.13inch E-Ink Display HAT+ for Raspberry Pi

The 2.13inch E-Ink Display HAT+ for Raspberry Pi is an innovative solution to equip your projects wi..

CHF21.90 Ex Tax: CHF20.26

200x200 1.54inch 4-Color E-Ink Display

200x200 1.54inch 4-Color E-Ink Display

With this 1.54-inch E-Ink display, you take your projects to the next level – power-saving, high-con..

CHF15.90 Ex Tax: CHF14.71

Tags: ePaper, GDEH0154D67, eink, e ink, E-Paper, e-Paper, Black, White, Display, Waveshare, Display, Wave Share, E-Ink, Lowpower, Low, Power, Arduino, ESP, 200x200, 1.54'', Raspberry, stm32, IL3829, SSD1681, Partial, Refresh, GDEP015OC1, SPI