264x176 2.7inch Black/White E-Ink Display Raspberry Pi HAT

This is a 2.7inch E-Ink / E-Paper display module with a resolution of 264×176 pixels, featuring an integrated controller that communicates via the SPI interface. As it has extremely low power consumption, it's great for battery-powered applications. These displays are also used in retail as price tags, where they can be operated with a battery for several years. The display has a very good viewing angle and can also be read very well in sunlight. It takes 6 seconds to build up the entire display image. Therefore, it is naturally not intended for applications where the display needs to be updated every second. The package also includes mounting screws for the Raspberry Pi. With the screws, the display can perfectly be attached to a Raspberry Pi.

Features:  

• Onboard level shifter, therefore compatible with 3.3V and 5V microcontrollers
  
• Displays remain on the display even without power supply 
  
• Ultra-low power consumption 
  
• Basically, power is only needed for refreshing  
  
• SPI interface for connecting to controller boards like Raspberry Pi, Arduino, ESP8266 or ESP32 
  
• Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  
• Onboard buttons 4 pieces available
  
• Detailed documentation and sample code available at Waveshare Wiki 
  
• Programming examples for the following controllers are available: Arduino, stm32 and Raspberry Pi 

Documentation: 

• Wiki: https://www.waveshare.com/wiki/2.7inch_e-Paper_HAT

Technical Details:  

• Manufacturer: Waveshare
• Manufacturer SKU: 13354
• Operating Voltage: 3.3V / 5V
  
• Interface: 3-wire SPI, 4-wire SPI  
  
• Exterior Dimension: 85mm × 56mm  
  
• Display Dimension: 57.288mm × 38.192mm  
  
• Pixel Size: 0.217mm × 0.217mm  
  
• Resolution: 264 × 176  
  
• Display Color: Black, White  
  
• Grey Level: 2   
  
• Full Refresh Time: 6s  
  
• Refresh Power: 24mW (typ.)  
  
• Standby Power: <0.017mW  
  
• Viewing Angle: >170°  
  
• Weight: 43g  
  

Delivery Contents:  

• 1x 264x176 2.7inch Black / White E-Ink Display Raspberry Pi HAT 
  
• 1x Mounting hardware for Raspberry Pi
• 1x PH2.0 8-Pin 20cm cable for STM32 or alternative microcontrollers