200x200 1.54inch E-Ink Raw Black / White e-Paper Display

This is a black and white E-Ink/E-Paper raw panel display module without a circuit board. The ePaper display has a diagonal of 1.54 inches with a resolution of 200x200 pixels. Thanks to the integrated controller, you can control the display via the SPI interface. This black and white display supports partial refreshes. Thus, individual areas can be updated quickly within 0.3 seconds. Updating the entire display also takes only 2 seconds. Due to its low power consumption, it is great for battery-operated applications. These displays are also used in sales as price tags, where they can be operated with a battery for several years. The display has a very good viewing angle and can be read very well even in sunlight. This affordable display is perfect for connecting to the "ESP8266 Universal Raw e-Paper Driver Board WiFi" board.

Features: 

• Supports partial refresh in only 0.3 seconds
• Images on the display remain even without power supply
• Ultra-low power consumption. Basically, power is only needed for refreshing 
• SPI interface
• Good documentation and sample code available at Waveshare Wiki
• Programming examples available for the following controllers: ESP8266, Arduino, stm32, and Raspberry Pi

Documentation:

• Wiki: https://www.waveshare.com/wiki/1.54inch_e-Paper_Module

Alternative libraries for Arduino:

• GxEPD: https://github.com/ZinggJM/GxEPD2

Technical Details: 

• Type: GDEP015OC1
• Driver IC: IL3829
• Connection: PFC24/0.5mm
• Operating Voltage: 3.3V 
• Interface: 3-wire SPI, 4-wire SPI 
• Outer Dimensions: 31.8 × 37.32 × 1.05mm
• Display Dimensions: 27.6 × 27.6mm 
• Pixel Size: 0.138mm × 0.138mm 
• Resolution: 200 × 200 
• Display Color: Black/White 
• Gray Level: 2 
• Partial Refresh Time: 0.3s
• Full Refresh Time: 2s 
• Refresh Power: 26.4mW(typ.) 
• Standby Power: <0.017mW 
• Viewing Angle: >170° 
• Weight: 6g 

Contents 

• 1x 200x200 1.54inch E-Ink Raw Black/White e-Paper Display