Water Pump JT-280AT 280-600L/h 6-18V

This DFRobot submersible pump delivers 280 to 600 L/h. It is suitable for watering plants, for fountains and small waterfalls or for pumping water in an aquarium. The pump runs at a noise level below 40 dB, and four suction cups on the underside hold it on smooth surfaces.

Important: The pump is intended for underwater operation only and must not run dry.

Recommended Accessories:

• 12V DC 4000mA Power Supply AC/DC Adapter 5.5mm/2.1mm Plug
• DC Socket Female Barrel Jack 5.5mm / 2.1mm with Screw Terminals
• 1-Channel Relay Module

Features:

• Submersible pump, protection class IP68
• Connection: brown or red to plus, blue or black to minus
• 4 suction cups for mounting
• Built-in filter, inflow adjustable by hand according to DFRobot
• 1 m hose included
• Switching on and off via a relay module on the microcontroller

Application Examples:

• Watering plants
• Fountains and small waterfalls
• Pumping water in an aquarium

Technical Data:

• Type: JT-280AT, DFRobot FIT0563
• Operating voltage: 6 V to 18 V DC
• Current consumption: 65 mA to 500 mA
• Power: 0.8 W to 15 W
• Flow rate: 280 to 600 L/h
• Maximum head: 60 to 420 cm
• Protection class: IP68
• Water outlet diameter: 10 mm
• Connection cable length: 1 m
• Noise level: below 40 dB
• Dimensions: 55 × 45 × 42 mm (DFRobot: 45 × 43 × 30 mm)
• Weight: 200 g (DFRobot: 300 g)

Scope of Delivery:

• 1× Water pump JT-280AT 280-600L/h 6-12V
• 1× hose 1 m