10W Solar Power Kit 12V / 5V Outputs monocrystalline panel

This DFRobot solar kit powers measuring stations and IoT devices outdoors without a mains connection. It consists of a 10 W monocrystalline solar panel and a charge controller in a weather-resistant enclosure with two regulated outputs 12 V/1 A and 5 V/1 A. The controller charges three 18650 lithium cells and protects them against overcharging and deep discharge, with cell balancing. Charging is via the panel with 17 to 20 V or via USB-C with 5 V/2 A, in strong sunlight according to DFRobot in about 8 hours.

Note: The three 18650 cells are not included. DFRobot requires cells with identical specifications and correct polarity. After inserting them, activate the battery output once via USB-C or the solar panel, then fit the sealing strip and cable glands and close the enclosure.


Features:

  • Two regulated outputs: 12 V/1 A and 5 V/1 A
  • Charge controller with overcharge and deep discharge protection and cell balancing
  • Solar input 17 to 20 V and USB-C 5 V/2 A
  • Enclosure with sealing strip and two PG7 cable glands
  • Mounting lugs can be screwed on top, bottom, left or right
  • 10 W monocrystalline panel

Application Examples:

  • Weather stations in the garden or in the field
  • Soil moisture measurement in agriculture
  • Outdoor water quality measurement
  • Powering LoRaWAN, NB-IoT and cellular measuring devices

Documentation:


Technical Data:

  • Manufacturer: DFRobot
  • Manufacturer SKU: KIT0210
  • Controller solar input: 17 to 20 V
  • Controller USB-C input: 5 V, 2 A
  • Charging current: max. 0.5 A
  • Charge cut-off voltage: 12.6 V
  • Outputs: 12 V/1 A and 5 V/1 A
  • Batteries: 3 × 18650 lithium, not included
  • Terminals: P1 GND, P2 12 V output, P3 GND, P4 5 V output, P5 GND, P6 solar input 17 to 20 V
  • Enclosure: 115 × 90 × 35 mm (without mounting lugs)
  • Panel power: 10 W
  • Panel peak voltage: 18 V
  • Panel peak current: 0.55 A
  • Panel open-circuit voltage: 21.6 V
  • Panel short-circuit current: 0.6 A
  • Panel dimensions: 210 × 310 × 17 mm
  • Weight: 1250 g

Scope of Delivery:

  • 1× solar charge controller in enclosure
  • 1× set of mounting lugs for the controller
  • 1× 10 W monocrystalline solar panel
  • 2× PG7 cable gland
  • 1× cable 2-core 22AWG, 1 m
  • 1× cable 4-core 22AWG, 1 m

Write a review

Note: HTML is not translated!
    Bad           Good

10W Solar Power Kit 12V / 5V Outputs monocrystalline panel

  • Brand: DFRobot
  • Product Code: 424647
  • Availability: In Stock
  • CHF46.90

  • Ex Tax: CHF43.39

Related Products

MPPT Solar Power Management Module for 6V-24V Solar Panel

MPPT Solar Power Management Module for 6V-24V Solar Panel

The module from Waveshare charges a 3.7 V Li-Ion battery from a 6 V to 24 V solar panel or via USB a..

CHF14.90 Ex Tax: CHF13.78

4x18650 Lithium Battery Shield 5V 3A / 3V 1A

4x18650 Lithium Battery Shield 5V 3A / 3V 1A

This battery shield holds four 18650 cells and uses it to supply a Raspberry Pi, Arduino, ESP8266 or..

CHF16.90 Ex Tax: CHF15.63

DFRobot Solar Power Manager for 12V Lead Batteries

DFRobot Solar Power Manager for 12V Lead Batteries

The DFRobot Solar Power Manager charges a 12 V lead-acid battery with up to 4 A from an 18 V solar p..

CHF29.90 Ex Tax: CHF27.66

Solar Power Manager V1.0 for 9V/12V/18V Solar Panel

Solar Power Manager V1.0 for 9V/12V/18V Solar Panel

The DFRobot Solar Power Manager charges a single 3.7 V lithium cell (Li-ion or LiPo) with up to 2 A ..

CHF36.90 Ex Tax: CHF34.14

Solar Power Manager (C) for 6-24V Solar Panel

Solar Power Manager (C) for 6-24V Solar Panel

This is a Solar Power Manager from Waveshare. The Power Manager supports panels from 6-24V, thus cha..

CHF23.90 Ex Tax: CHF22.11

LilyGo TTGO T-BAT 18650 Battery Holder with CN3065 Solar Power Manager

LilyGo TTGO T-BAT 18650 Battery Holder with CN3065 Solar Power Manager

The LilyGo T-BAT combines a solar charge controller with the CN3065 chip and a battery holder for on..

CHF12.90 Ex Tax: CHF11.93

DFRobot 3.7V Solar Li-Po Charge Controller

DFRobot 3.7V Solar Li-Po Charge Controller

The solar charge controller from DFRobot charges a single-cell lithium battery (3.7 V) from a solar ..

CHF6.90 Ex Tax: CHF6.38

Solar Lipo Charger with USB 5V 1A V2.3

Solar Lipo Charger with USB 5V 1A V2.3

This solar charge controller charges a 3.7 V lithium battery from a 5 V solar panel or via the mini ..

CHF10.90 Ex Tax: CHF10.08

5.5V 1A monocrystalline solar panel 6W with bracket

5.5V 1A monocrystalline solar panel 6W with bracket

This monocrystalline 5.5V 6W solar panel is a reliable and efficient solution for your outdoor proje..

CHF26.90 Ex Tax: CHF24.88

SenseCAP Solar Node P1 for Meshtastic & LoRa

SenseCAP Solar Node P1 for Meshtastic & LoRa

The Seeed Studio SenseCAP Solar Node P1 is a fully solar-powered outdoor module for Meshtastic and L..

CHF79.00 Ex Tax: CHF73.08

SenseCAP Solar Node P1-Pro for Meshtastic & LoRa

SenseCAP Solar Node P1-Pro for Meshtastic & LoRa

The SenseCAP Solar Node P1-Pro is the advanced version of the popular P1, combining self-sufficient ..

CHF105.00 Ex Tax: CHF97.13

SenseCAP A1102 LoRaWAN Vision AI Sensor

SenseCAP A1102 LoRaWAN Vision AI Sensor

The Seeed Studio SenseCAP A1102 is an industrial-grade LoRaWAN camera sensor that performs artificia..

CHF89.90 Ex Tax: CHF83.16

Tags: Meshtastic, Solar, Outdoor, Power, 12V, 5V, Panel, 18650, Weatherproof, IoT, Sensor, Arduino, Raspberry, Energy, Solar Power, Kit, DFRobot, KIT0210