4x18650 Lithium Battery Shield 5V 3A / 3V 1A

This 1x18650 battery shield is perfect for powering your Raspberry Pi, Arduino, ESP8266, or ESP32 with 18650 Li-ion battery. The shield also has built-in charging electronics, allowing you to recharge the lithium batteries via the micro USB connection. (Batteries not included).

Attention: When inserting the 18650 lithium battery, note the polarity + and -, otherwise the charging chip will be destroyed!


Recommended Accessories:


Features:

  • Battery protection for overcharge and deep discharge
  • Easy charging via Micro USB or USB Type-C port with up to 0.5A
  • Side switch for on and off
  • 3A 5V USB Type-A output or soldering pins (5 x 5V soldering pins available)
  • 1A 3V output via soldering pins (5 x 3V soldering pins available)
  • LED display 4xRed for charging status

Operation:

  • After inserting the 18650 cells, the shield must be briefly supplied with power via the micro USB or USB Type-C (it will then switch on).
  • The charging state can be checked by briefly pressing the side button (K1)
  • To switch off the 5V and 3V outputs, the side button (K1) must be pressed for more than 3 seconds. (new version 2x short press)
  • To switch on, simply press the side button (K1) briefly

Technical Details:

  • Number of 18650 batteries: 4
  • Protection electronics: Overcharge and deep discharge protection
  • Micro-USB + USB Type-C connection for charging
  • Maximum output current 5V: 3A (briefly tested up to 4A)
  • Maximum output current 3V: 1A
  • 1x 5V 3A USB Type-A socket
  • 5x 5V 3A connection for soldering pins
  • 5x 3V 1A connection for soldering pins
  • 4x Mounting hole diameter 3mm
  • Dimensions: 102 x 96 x 22mm
  • Weight: 67g

Scope of Delivery:

  • 4x18650 lithium battery shield 5V 3A / 3V 1A (Batteries not included)


Write a review

Note: HTML is not translated!
    Bad           Good

4x18650 Lithium Battery Shield 5V 3A / 3V 1A

  • Brand: purecrea
  • Product Code: 421084
  • Availability: In Stock
  • CHF16.90

  • Ex Tax: CHF15.63

Related Products

Li-Ion Battery 3.7V 3200mA NCR18650B 18650 with Button Terminal

Li-Ion Battery 3.7V 3200mA NCR18650B 18650 with Button Terminal

With this Panasonic lithium-ion battery, you can power your battery-operated Arduino projects. The L..

CHF8.90 Ex Tax: CHF8.23

Lii-202 Dual Universal Charger

Lii-202 Dual Universal Charger

With this intelligent universal charger, you can charge Li-ion, Li-Fe, NiCd and Ni-MH batteries of v..

CHF18.90 Ex Tax: CHF17.48

2x18650 Lithium Battery Shield 5V 3A / 3V 1A

2x18650 Lithium Battery Shield 5V 3A / 3V 1A

This Battery Shield is perfect for powering your Raspberry Pi, Arduino, ESP8266, or ESP32 with a 186..

CHF12.90 Ex Tax: CHF11.93

Raspberry Pi 4 4G Model B (Cortex-A72)

Raspberry Pi 4 4G Model B (Cortex-A72)

The Raspberry Pi 4B is the 4th generation of the popular Raspberry Pi family! Compared to its predec..

CHF59.90 Ex Tax: CHF55.41

1x18650 Lithium Battery Shield 5V 3A / 3V 1A

1x18650 Lithium Battery Shield 5V 3A / 3V 1A

This 1x18650 battery shield is perfect for powering your Raspberry Pi, Arduino, ESP8266 or ESP32 wit..

CHF9.90 Ex Tax: CHF9.16

Raspberry Pi 4 8G Model B (ARMv8)

Raspberry Pi 4 8G Model B (ARMv8)

The Raspberry Pi 4B is the 4th generation of the popular Raspberry Pi family! Compared to its predec..

CHF84.90 Ex Tax: CHF78.54

UPS HAS for Raspberry Pi Uninterruptible Power Supply

UPS HAS for Raspberry Pi Uninterruptible Power Supply

With this UPS / UPS HAT, you can continue to run your Raspberry Pi after a power failure until the b..

CHF23.90 Ex Tax: CHF22.11

Solar Power Manager (C) for 6-24V Solar Panel

Solar Power Manager (C) for 6-24V Solar Panel

This is a Solar Power Manager from Waveshare. The Power Manager supports panels from 6-24V, thus cha..

CHF23.90 Ex Tax: CHF22.11

4x18650 Lithium Battery Shield DFrobot 3A 5V/3.3V

4x18650 Lithium Battery Shield DFrobot 3A 5V/3.3V

This 4-slot 18650 battery compartment from DFRobot has 5x 5V/2A and 3V/1A outputs as well as a 5V US..

CHF18.90 Ex Tax: CHF17.48

1x18650 Lithium Battery Shield Dfrobot 5V 2A / 3.3V

1x18650 Lithium Battery Shield Dfrobot 5V 2A / 3.3V

This 18650 lithium battery shield features 3x 5V/2A and 3x 3.3V/1A outputs, as well as a 5V/2A USB o..

CHF9.90 Ex Tax: CHF9.16

2x18650 Lithium Battery Shield Dfrobot 5V 2A / 3.3V

2x18650 Lithium Battery Shield Dfrobot 5V 2A / 3.3V

This 18650 lithium battery shield features 5x 5V/2A and 5x 3.3V/1A outputs, as well as a 5V/2A USB o..

CHF14.90 Ex Tax: CHF13.78

Li-Ion Battery 3.7V 3200mA NCR18650B 18650 with Flat Top

Li-Ion Battery 3.7V 3200mA NCR18650B 18650 with Flat Top

With this Panasonic lithium-ion battery, you can realize your battery-powered Arduino projects. The ..

CHF8.90 Ex Tax: CHF8.23

UPS UPS Module 5V 5A Uninterrupted 18650 Battery Board

UPS UPS Module 5V 5A Uninterrupted 18650 Battery Board

With the UPS Module 3S for your Raspberry Pi, you get a reliable uninterruptible power supply that s..

CHF25.90 Ex Tax: CHF23.96

Tags: Batterieshield, 4x18650, Raspberry, ESP32, ESP8266, Arduino, LiPo, Li-Ion, NCR18650B, Panasonic, Cell, Battery, Battery operation, Battery operation, 18650, Battery compartment, Lithium, Lithium block, Li-Ion battery, Lithium Ion battery, Built-in battery, Special battery, Industrial battery, V8, V9, Charge controller, Raspberry.