SenseCap S2103 LoRaWAN CO2, Temperature and Humidity Sensor

This SenseCap S2103 sensor is a CO2 (NDIR measurement principle), temperature and humidity LoRa sensor node from Seedstudio. The S2103 measures CO2 in a range of 400-10000ppm, temperatures from -40°C to +85°C, and humidity from 0%-100%. The data is transmitted to the server via a LoRaWAN gateway and can thus be read out. The range is approximately 2-10km, depending on interference and environment. The SenseCap sensors from Seedstudio are high-quality, easy-to-use LoRaWAN sensor nodes for environmental monitoring such as in agriculture or smart home applications. The LoRaWAN network enables communication over long distances with low power consumption. The built-in 19Ah battery allows for run times of up to 10 years (depending on reception and transmission rates) and is easy to replace. The sensors are user-friendly and easy to install. The entire set-up takes place directly with the mobile phone via Bluetooth, without tedious programming on the PC. For this, the "SenseCap Mate" app is required from the Playstore or App Store. The sensors are installed in an IP66 waterproof housing and can therefore also be used outdoors. 

Features: 

• Accurate CO2 value determination by NDIR detection measurement principle 
• High-quality, industrial LoRaWAN sensor node 
• Easy operation with mobile APP 
• LoRaWAN v1.0.3 Class A protocol  
• Identification key can be conveniently scanned as a QR code 
• Large 19Ah battery for up to 10 years of transmission time 
• Battery is easy to replace  
• High-quality IP66 housing 

Documentation: 

• User Guide

Technical Details: 

• Manufacturer: Seedstudio 
• Manufacturer SKU: 114992869 
• Model: S2103 
• Battery: 19Ah 3.6V Li-SOCl2 ER34615 
• MCU: Wio-E5 
• LoRa Protocol: v1.0.3 Class A 
• Frequency: 868MHz 
• Max Transmission: 19dBm 
• Sensitivity: -136dBm@SF12 BW=125KHz 
• Range: 2-10km 
• IP Rating: IP66 
• Battery Capacity: 19Ah 
• Transmission Time: up to 10 years 
• CO2 Sensor: 
• Measurement Range: 400 – 10000ppm 
• Tolerance: ±(30+3%MV) 
• Resolution: 1ppm 
• Temperature sensor: 
• Measurement Range: -40°C – 85°C 
• Tolerance: ±0.2°C 
• Resolution: 0.01°C 
• Long-term deviation: <0.03°C/year 
• Humidity sensor: 
• Measurement Range: 0-100% RH 
• Tolerance: ±1.8% RH 
• Resolution: 0.01% RH 
• Long-term deviation: <0.25% RH/year 
• Dimensions: 63 x 57 x 184.2mm 
• Weight: 452g 

Package Contents: 

• 1x SenseCAP S2103 LoRaWAN CO2, Temperature and Humidity Sensor
• 1x Replacement Seal 
• 4x Mounting Screw