SenseCAP S2102 LoRaWAN Light Sensor

This SenseCAP S2102 sensor is a LoRaWAN light intensity sensor node from Seeed Studio. The S2102 measures light intensity within a range of 0 - 160000 Lux with a tolerance of ±5% and a resolution of 1 Lux. The data is transmitted to the server through a LoRaWAN gateway and can be read out. The range is approximately 2-10Km, depending on interference and environment. Seeed Studio's SenseCAP sensors are high quality, easy to use LoRaWAN sensor nodes for environmental monitoring e.g. in agriculture or smart home applications. The LoRaWAN network enables communication over large distances with low power consumption. The built-in 19Ah battery allows runtimes of up to 10 years (depending on reception and transmission rates), and is easy to replace. The sensors are user-friendly and easy to install. The whole set-up is done directly with the mobile phone via Bluetooth, without tedious programming on the PC. The "SenseCAP Mate" app from the Playstore or App Store is required. The sensors are housed in an IP66 waterproof casing and can therefore also be used outdoors. 

Features: 

• High quality, industrial LoRaWAN sensor node 
• Easy operation with mobile APP 
• LoRaWAN v1.0.3 Class A protocol  
• Identification key can conveniently be scanned as QR code 
• Large 19Ah battery for up to 10 years of transmission time 
• Battery is easy to replace  
• High quality IP66 housing 

Documentation: 

• User Manual

Technical Details: 

• Manufacturer: Seeed Studio  
  
• Manufacturer SKU: 114992868 
  
• Model: S2102 
  
• Battery: 19Ah 3.6V Li-SOCl2 ER34615 
  
• MCU: Wio-E5 
  
• LoRa Protocol: v1.0.3 Class A 
  
• Frequency: 868MHz 
  
• Max Transmission: 19dBm 
  
• Sensitivity: -136dBm@SF12 BW=125KHz 
  
• Range: 2-10km 
  
• IP-Rating: IP66 
  
• Battery Capacity: 19Ah 
  
• Transmission Time: up to 10 years 
  
• Light Sensor: 
  
• Measuring Range: 0 - 160000 Lux 
  
• Tolerance: ±5% 
  
• Resolution: 1 Lux 
  
• Dimension: 63 x 57 x 184.2mm 
  
• Weight: 457g 

Package Includes: 

• 1x SenseCAP S2102 LoRaWAN Light Sensor  
  
• 1x Replacement Seal 
  
• 4x Mounting Screw