PLA+ Magenta Filament 1.75mm 1Kg eSun

PLA Plus Magenta PLA+175M1 from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Toughness
• Layer adhesion
• Flame retardant
• Odorless when printing

eSUN PLA+ is considered by many to be the new standard for PLA printing and also offers you a very good price-performance ratio. It is not only easier to process, but you also produce better 3D print parts with smooth and clean surfaces.

Conclusion: PLA+ is very well suited for beginners and professionals, is easy to print, and also offers good adhesion properties and almost no warping effect when printing! PLA+ is also a very good alternative to ABS, when something needs to be tough, for example, printed children's toys! PLA+ has very good elongation and flexural strength to resist drops, impacts, and breaks due to stretching. In addition, PLA+ does not produce any odors when printing, unlike ABS.

Properties of PLA+:

• Very durable
• Easy to print
• Very good adhesion on the print bed
• Top print quality and great price-performance ratio

PLA+ recommended print parameters:

• Print temperature: 205-225°C Recommended: 210°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed rate: 40-60mm/s (2400-3600mm/min)

Bambu Lab AMS-compatible cardboard spool:

Our cardboard spools are perfectly tuned for use with the Bambu Lab AMS. The plastic coating of the cardboard running surface allows handling just like conventional plastic spools – without any adapter. An environmentally friendly solution that doesn't neglect comfort.

• Perfect Compatibility: Can be used directly in Bambu Lab AMS without additional tools.
• Easy to handle: Due to the plastic coating of the cardboard running surface, it can be used like plastic spools.
• Environmentally friendly: Simple and ecological disposal through cardboard recycling paths.

Download:

• eSun Product Manual
• Safety Data Sheet PLA+
• Filament Data Sheet

Technical details:

• Color: Magenta 
• Item number: PLA+175M1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break:29%
• Tensile strength: 60MPa
• Heat resistance: 52°C
• Spool size outer diameter: 200mm
• Spool width: 64mm
• Inner diameter (hole): 55mm
• Filament weight: 1000g
• Total weight: 1360g
• Dimensions: 198 x 198 x 60mm

Scope of delivery:

• 1x PLA+ Magenta Filament 1.75mm 1Kg eSun