PETG Purple Filament 1.75mm 1Kg eSun

The big advantage of PETG over ABS or PLA filament is its durability and the robust build of the material. This means that PETG filament is much more impact resistant than ABS. But the best-known advantage of PETG is that it largely reduces warping. This allows you to print parts without much effort that don't warp.

Conclusion: PETG Solid by Esun is very suitable for beginners and professionals, is easy to print, and provides good adhesion properties and almost no wrap effect when printing! PETG is the perfect alternative to ABS. PETG has very good toughness and impact resistance to withstand falls, impacts, and breaks due to stretching. Unlike with ABS, there are also no odors when printing with PETG.

Properties:

• Very resistant
• Water resistant and suitable for aquariums (100% infill)
• Top printing results and great price/performance ratio
• Low shrinkage rate, hence less warping
• Optimal layer adhesion
• Good impact resistance
• Heat resistant
• Very good weather resistance
• High UV resistance
• Resistant to many chemicals and oil
• PETG combines the advantages of PLA and ABS
• Building material class B1, difficult to ignite

Recommended printing parameters for PETG:

• Print temperature: 230-250°C Recommended: 240°C
• Heated bed temperature: 80°C
• Fan speed: 50 to 100% Recommendation: 60%
• Feed speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety data sheet PETG
• Data sheet filament

Technical Details:

• Color: Purple Solid
• Weight Filament: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 230-250°C
• Density: 1.23g/cm3
• Melt flow index: 20g/10min
• Impact resistance: 7kJ/m²
• Elongation at break: 228%
• Tensile strength: 49MPa
• Dimensional stability: 64°C
• Spool size diameter outside: 20cm
• Spool width: 6.7cm
• Diameter inside (hole): 5.3cm
• Weight Filament: 1000g
• Weight Empty Spool: 278g
• Total weight: 1460g
• Dimensions: 205 x 215 x75mm

Scope of delivery:

• 1x PETG Purple Solid Filament 1.75mm 1Kg eSun