HALENG I²C Hub 10-Port Splitter for Grove, STEMMA QT and Qwiic

The I²C Hub from HALENG splits one I²C bus into ten connections: 4× GROVE/STEMMA, 4× QT/Qwiic and one 2.54 mm pin header each as male and female. This lets you connect sensors, displays and other I²C devices with different connector systems to a microcontroller without soldering. All connections share the same bus; SDA, SCL and the supply are passed straight through. The hub is not a multiplexer, so the connected devices need different I²C addresses. A two-way DIP switch enables 4.7 kΩ pull-ups for SDA and SCL if the bus does not have any yet. A green LED shows that supply voltage is present. The board measures only 40 × 25 mm and has four mounting holes with 2 mm diameter. Together with the HALENG I²C Doctor I2C Bus Tester and Analyser White a setup with several sensors can be checked quickly.


Recommended Accessories:


Features:

  • Ten connections: 4× GROVE/STEMMA, 4× QT/Qwiic, 2× 2.54 mm pin header (male/female).
  • Connects devices with different connector systems without soldering or adapter cables.
  • Switchable 4.7 kΩ pull-ups for SDA and SCL via a two-way DIP switch.
  • Green LED indicates the supply voltage.
  • All ports on the same bus, no multiplexer: each I²C address may only occur once.
  • Compact board 40 × 25 mm with four mounting holes (2 mm).

Application Examples:

  • Several environmental sensors on one microcontroller, for example for a weather station
  • Mixing Grove modules and Qwiic sensors in the same setup
  • Prototyping with sensors and displays on a shared bus
  • Test setup with the I²C Doctor and several devices

Technical Specifications:

  • Manufacturer: HALENG
  • Manufacturer SKU: I2C-HUB
  • Connections: 4× GROVE/STEMMA, 4× QT/Qwiic, 2× 2.54 mm pin header (male/female)
  • Bus protocol: I²C, all ports in parallel
  • Pull-ups: 4.7 kΩ for SDA/SCL, switchable via DIP switch
  • Indicator: green VDD LED
  • Mounting: 4 holes 2 mm, 3 mm from the edge
  • Dimensions: 40 × 25 × 12 mm
  • Weight: 6 g
  • Package dimensions: 110 × 50 × 20 mm
  • Gross weight: 10 g

Contents:

  • 1× HALENG I²C Hub 10-Port Splitter for Grove, STEMMA QT and Qwiic

Write a review

Note: HTML is not translated!
    Bad           Good

HALENG I²C Hub 10-Port Splitter for Grove, STEMMA QT and Qwiic

  • Brand: HALENG
  • Product Code: 426006
  • Availability: Out Of Stock
  • CHF11,90

  • Ex Tax: CHF11,01

Related Products

M5Stack Grove-T Connectors 5 Pieces

M5Stack Grove-T Connectors 5 Pieces

The M5Stack Grove-T is a T-splitter: it splits one Grove connection into two, for example to connect..

CHF7,90 Ex Tax: CHF7,31

8-Channel I2C Multiplexer TCA9548A

8-Channel I2C Multiplexer TCA9548A

This I2C multiplexer with the Texas Instruments TCA9548A allows several I2C sensors with the same ad..

CHF5,90 Ex Tax: CHF5,46

M5Stack Grove2Grove Expansion Unit

M5Stack Grove2Grove Expansion Unit

This is a Grove to Grove extension unit from M5Stack. With this unit, you can connect two Grove (HY2..

CHF6,90 Ex Tax: CHF6,38

Gravity I2C HUB

Gravity I2C HUB

The Gravity I2C HUB from DFRobot distributes one I2C bus to up to eight devices. The input is a 4-pi..

CHF3,90 Ex Tax: CHF3,61

M5Stack Pa.HUB V2.1 I2C Expansion Unit 1 to 6 PCA9548A

M5Stack Pa.HUB V2.1 I2C Expansion Unit 1 to 6 PCA9548A

With the M5Stack Pa.HUB V2.1 expansion unit, you expand your I2C communication efficiently and flexi..

CHF8,90 Ex Tax: CHF8,23

M5Stack Grove Y Cable 20cm 5 pieces

M5Stack Grove Y Cable 20cm 5 pieces

With the M5Stack Grove Y Cable Set (20cm), you get a simple and practical way to efficiently expand ..

CHF6,90 Ex Tax: CHF6,38

Gravity I2C Address Changer

Gravity I2C Address Changer

The DFRobot address shifter uses the LTC4316 to translate the I2C address of a connected sensor in h..

CHF9,90 Ex Tax: CHF9,16

HALENG I²C Doctor I2C Bus Tester and Analyser White

HALENG I²C Doctor I2C Bus Tester and Analyser White

The I²C Doctor from HALENG is a handy diagnostic tool for the I²C bus. It reveals faults at the elec..

CHF49,90 Ex Tax: CHF46,16

Tags: I²C, Hub, Splitter, HALENG, Grove, STEMMA QT, Qwiic, Pull-up, Sensor Bus, SDA, SCL, Connector, Prototyping, Microcontroller, Breakout