6Kg 180° Servo with Slip Clutch

With servos, it can happen that if the mechanical load is greater than the specification, it can lead to damage to the gearbox or overheating. With these special clutch servos with a clutch function and electronic protection, it is no longer possible for an overload or damage to occur. If the angle of a servo is changed by external forces during normal operation, the servo can be automatically reset and continue to work through the clutch function, preventing damage. The additional electronic protection switches off the blocked servo after 5 seconds to avoid overheating. This servo has a high torque, stable performance, accurate running angle and is easy to install. When the servo is operated at 6V, it reaches its stall torque of 6Kg. There is no limited stop inside the servo, so it can rotate smoothly in 360 degrees (manual only). You can control the servo with the servo libraries from your Arduino IDE and control it over a maximum 180-degree angle of rotation within the pulse range of 500-2500μsec.

Servo connector pinout:

Technical Details:

• Operating Voltage: 4.8 to 6V DC
• Type: DS-R001
• Communication: PWM
• Operating Angle: 180°±10°
• Pulse Width Range: 500 to 2500μs
• Static Current: ≤10mA at 6.0V
• No-load Current: ≤60mA at 6.0V
• Stall Current: ≤1.65A at 6.0V
• Rated Torque: ≥4.4kg cm at 6.0V
• Stall Torque: ≥6.0kg cm at 6.0V
• Dimension: 55.4 x 20 x 41.8mm
• Weight: 51g

Package Included:

• 1x 6Kg 180° Servo with Slip Clutch
• 1x Servo Arm Set