2Kg 300° Servo with Slip Clutch

With servos, it can happen that if the mechanical load is greater than the specification, it can lead to damage to the gearbox or overheating. With these special clutch servos with a clutch function and electronic protection, overload or damage can no longer occur. If the angle of a servo is changed by external forces during normal operation, the servo can be automatically reset and continue working through the clutch function, preventing damage. The additional electronic protection switches off the blocked servo after 5 seconds to avoid overheating. This servo has a large torque, stable performance, an accurate running angle and is easy to install. When the servo is operated at 6V, it reaches its standstill torque of 2Kg. There is no limiting stop inside the servo, so it can rotate smoothly in 360 degrees (manually only). You can control the servo with the servo libraries from your Arduino IDE and control it over a maximum 300-degree rotation angle within the pulse range of 500-2500μsec.

Servo plug assignment:

Technical Details:

• Operating voltage: 4.8 to 6V DC
• Type: DS-R005
• Communication: PWM
• Operating angle: 300°±10°
• Pulse width range: 500 to 2500μs
• Static current: ≤8mA at 6.0V
• Idle current: ≤110mA at 4.8V ≤120mA at 6.0V
• Standstill current: ≤700mA at 4.8V ≤800mA at 6.0V
• Rated torque: ≥0.45kg cm at 4.8V ≥0.55kg cm at 6.0V
• Standstill torque: ≥1.6kg cm at 4.8V ≥2.0kg cm at 6.0V
• Dimension: 42.4 x 16.6 x 37mm
• Weight: 25g

Delivery content:

• 1x 2Kg 300° Servo with slip clutch
• 1x servo lever set