2Kg 180° Servo with slip clutch

With servos, it may happen that if the mechanical load is greater than the specification, it can lead to damage to the gearbox or overheating. With these special clutch servos with a clutch function and electronic protection, there can no longer be any overload or damage. If the angle of a servo is changed by external forces during normal operation, the servo can be automatically reset and continue to work through the clutch function, preventing damage. The additional electronic protection switches off the blocked servo after 5 seconds to prevent overheating. This servo has a large torque, stable performance, accurate running angle and is easy to install. When the servo is operated with 6V, it reaches its stall torque of 2Kg. There is no limited stop inside the servo, so it can rotate smoothly in 360 degrees (manually only). You can control the servo with the servo libraries from your Arduino IDE and control it over a maximum 180-degree rotation angle within the pulse range of 500-2500μsec.

Servo plug pinout:

Technical Details:

• Operating voltage: 4.8 to 6V DC
• Type: DS-R005
• Communication: PWM
• Operating angle: 180°±10°
• Pulse width range: 500 to 2500μs
• Static current: ≤8mA at 6.0V
• Idle current: ≤110mA at 4.8V ≤120mA at 6.0V
• Standby current: ≤700mA at 4.8V ≤800mA at 6.0V
• Rated torque: ≥0.45kg cm at 4.8V ≥0.55kg cm at 6.0V
• Stall torque: ≥1.6kg cm at 4.8V ≥2.0kg cm at 6.0V
• Dimension: 42.4 x 16.6 x 37mm
• Weight: 25g

Delivery includes:

• 1x 2Kg 180° Servo with Slip Clutch
• 1x Servo Arm Set