270x270 mm CryoGrip pro Frostbite build plate for Snapmaker U1

The CryoGrip Pro Frostbite print sheet by BIQU is a double-sided spring steel plate with a rough microstructure designed for maximum adhesion with PLA and PETG. The surface provides very strong initial layer adhesion and prevents warping even with small parts or low contact area. The flexible spring steel material allows finished prints to be easily removed by bending the plate after cooling.

Note: The Frostbite surface is not compatible with technical high-temperature materials like ABS, ASA, or PA, as they can damage the microstructure. Clean only with water and soap – do not use alcohol!

Recommended accessories:

• 3DLac Adhesive Spray 400 ml
• 1 Liter Isopropyl Alcohol / Isopropanol 99.8%

Features:

• Frostbite coating provides maximum adhesion for PLA and PETG
• Significantly reduced or disabled bed heating lowers power consumption by up to 50%
• Rough textured surface creates a matte and stable first layer
• Optimized bed temperatures: PLA 30–50 °C, PETG 50–70 °C
• Not compatible with technical materials like ABS, ASA, or PA
• Spring steel allows for easy print removal after cooling
• Compatibility precisely tuned to the Snapmaker U1

Application examples:

• Small and complex PLA/PETG parts adhere reliably to the rough surface
• Batch prints benefit from very strong adhesion and reduced heating performance
• Model building and functional parts achieve an even matte underside
• After cooling, parts can be efficiently removed by bending the plate
• Print jobs with PLA and PETG require less heating energy and run more economically

Technical data:

• Manufacturer: BIQU
• Manufacturer SKU: 3010200090
• Material: Spring steel
• Surface: CryoGrip Pro Frostbite, rough, double-sided
• Compatibility: Snapmaker U1
• Recommended bed temperatures: PLA 30–50 °C, PETG 50–70 °C
• Material compatibility: Only PLA and PETG; not suitable for ABS, ASA, PA
• Cleaning: Water and soap (no alcohol)
• Product dimensions: 270 × 270 × 1 mm
• Package dimensions: 270 × 270 × 1 mm
• Gross weight: 354 g

Scope of delivery:

• 1× 270 × 270 mm CryoGrip Pro Frostbite build plate print sheet for Snapmaker U1