TP4056 Lithium LiPo Battery Charging Module USB C 5V 1A

With this LiPo Charger, you can safely charge and discharge 1s (1 cell) Lipo batteries such as 18650. The built-in TP4056 chip protects the battery from overcharging and deep discharge. The charging current is set with the resistor R3. By default, a 1.2kOhm resistor is installed, which limits the charging current to 1000mA. If you have small batteries that must not be charged with 1A, usually batteries <1000mAh, the resistor R3 must be replaced with a higher resistance value.

Connection TC4056:

• Out+ => Load+
• Out- => Load+
• B+ => Battery+
• B- => Battery-

Documentation:

• Datasheet DW01A
• Datasheet TP4056

Technical Data:

• Charging Controller Chip: TP4056A
• Protection Chip: DW01A
• Connection: USB C or soldering connection
• Charging Type: Linear
• Operating Temperature: -10 degrees to +85 degrees.
• Charging Current Default: 1A (R3=1.2kOhm)
• Max Discharge Current: 3A
• Charging Precision: 1.5%
• Input Voltage: 4.5V to 5.5V DC
• Full Charge Voltage: 4.2V
• LED Indicator Blue: Fully charged
• LED Indicator Red: Charging
• Dimension: 29 x 17 x 4.1mm
• Weight: 3g

Scope of Delivery:

• 1x TP4056 Lithium LiPo Battery Charging Module USB C 5V 1A