TP4056 Lithium LiPo Battery Charging Module Micro USB 5V 1A

With this LiPo Charger, you can safely charge and discharge 1s (1 cell) Lipo batteries like 18650. The built-in TP4056 chip protects the battery against overcharging as well as deep discharge. The charge current is set with the resistor R3. By default, a 1.2kOhm resistor is installed here, which limits the charge current to 1000mA. If you have small batteries that must not be charged with 1A, usually batteries <1000mAh, the resistor R3 must be replaced with a higher resistance value.

Connection TC4056:

Download Links TP4056 Charge Controller:

• DW01A Datasheet
  
• TP4056 Datasheet
  

Technical Details:

• Charge Controller Chip: TP4056A
  
• Protection Chip: DW01A
  
• Connection: Micro USB or via solder connection
  
• Charging Type: Linear
  
• Operating Temperature: -10 degrees to +85 degrees.
  
• Charge Current Default: 1A (R3=1.2kOhm)
  
• Max Discharge Current: 3A
  
• Charging Precision: 1.5%
  
• Input Voltage: 4.5V to 5.5V DC
  
• Full Charge Voltage: 4.2V
  
• Deep Discharge Cut-Off Voltage: 2.5V
  
• LED Display Blue: Fully Charged
  
• LED Display Red: Charging
  
• Weight: 2g
  
• Dimensions: 29 x 17 x 4.1mm
  

Scope of Delivery:

1x TP4056 Lithium LiPo Battery Charging Module Micro USB 5V 1A