TP4056 Lithium LiPo Battery Charging Module USB C 5V 1A

With this LiPo Charger, you can safely charge and discharge 1s (1 cell) Lipo batteries such as 18650. The TP4056 chip controls charging, and the DW01A chip protects the battery against overcharging and deep discharge. The charging current is set with the resistor R3. By default, a 1.2kOhm resistor is installed, which limits the charging current to 1000mA. If you have small batteries that must not be charged with 1A, usually batteries <1000mAh, the resistor R3 must be replaced with a higher resistance value.


Connection TC4056:

  • Out+ => Load+
  • Out- => Load-
  • B+ => Battery+
  • B- => Battery-

Important: Always connect the load to OUT+ and OUT-. The protection against deep discharge and overcurrent only works there. Do not connect B- and OUT- together, as this disables the protection.


Documentation:


Technical Data:

  • Charging Controller Chip: TP4056A
  • Protection Chip: DW01A
  • Connection: USB C or soldering connection
  • Charging Type: Linear
  • Operating Temperature: -10 degrees to +85 degrees.
  • Charging Current Default: 1A (R3=1.2kOhm)
  • Max Discharge Current: 3A
  • Charging Precision: 1.5%
  • Input Voltage: 4.5V to 5.5V DC
  • Full Charge Voltage: 4.2V
  • LED Indicator Blue: Fully charged
  • LED Indicator Red: Charging
  • Dimension: 29 x 17 x 4.1mm
  • Weight: 3g

Scope of Delivery:

  • 1x TP4056 Lithium LiPo Battery Charging Module USB C 5V 1A


Write a review

Note: HTML is not translated!
    Bad           Good

TP4056 Lithium LiPo Battery Charging Module USB C 5V 1A

  • Brand: purecrea
  • Product Code: 423919
  • Availability: In Stock
  • CHF3.90

  • Ex Tax: CHF3.61

Related Products

WeMos D1 Mini LIPO Battery Shield V1.2.0

WeMos D1 Mini LIPO Battery Shield V1.2.0

This shield (marked WEMOS BATTERY Shield V1.2.0) powers a WeMos D1 mini from a single lithium cell a..

CHF7.90 Ex Tax: CHF7.31

TP4056 Lithium LiPo Battery Charging Module Micro USB 5V 1A

TP4056 Lithium LiPo Battery Charging Module Micro USB 5V 1A

This charging module is used to charge and discharge single-cell (1S) lithium batteries, for example..

CHF2.90 Ex Tax: CHF2.68

18650 Battery Compartment / Battery Holder with Connection Cable

18650 Battery Compartment / Battery Holder with Connection Cable

This battery holder is suitable for one 18650 Li-Ion / LiPo battery. The already stripped connection..

CHF2.90 Ex Tax: CHF2.68

1-Slot 18650 Battery Case / Battery Holder

1-Slot 18650 Battery Case / Battery Holder

This battery holder takes one cell of type 18650 without protection electronics. Pin contacts on the..

CHF2.90 Ex Tax: CHF2.68

DFRobot Lithium Battery Charger

DFRobot Lithium Battery Charger

This charging module from DFRobot charges single-cell lithium batteries, Li-ion or Li-polymer with 3..

CHF12.90 Ex Tax: CHF11.93

MP2636 5V Step-Up / Li-Ion Battery Charger

MP2636 5V Step-Up / Li-Ion Battery Charger

The DFRobot module with the MP2636 from Monolithic Power Systems charges a single-cell Li-ion or Li-..

CHF11.90 Ex Tax: CHF11.01

Li-ion Battery Charging Module with DC-DC Step Up Boost Converter

Li-ion Battery Charging Module with DC-DC Step Up Boost Converter

This module charges a 3.7 V Li-ion cell, for example 18650, and at the same time generates an adjust..

CHF4.90 Ex Tax: CHF4.53

Tags: TC4056, TP4056, TP4056A, charge controller, Lipo, charger, charging device, charging electronics, overcharge protection, deep discharge, 18650, battery, USB-C, DW01A