Solar Lipo Charger with USB 5V 1A V2.3
This solar charge controller charges a 3.7 V lithium battery from a 5 V solar panel or via the mini USB socket and at the same time provides a stable 5 V with up to 1 A at a USB-A socket. The CN3065 charging chip adapts the charging current to the power of the source, typically it charges with 500 mA. Battery and solar panel are connected via JST 2.0 connectors.
Important: The CN3065 charging chip itself has no deep discharge protection. Therefore only use batteries with built-in protection circuit. Battery and solar panel are not included.
Recommended Accessories:
Features:
- CN3065 charging chip, end-of-charge voltage 4.2 V ±1 %
- Charging current typically 500 mA (400 to 600 mA), adapts to the power of the source according to the datasheet
- Charging via 5 V solar panel or mini USB
- 5 V output up to 1 A on USB-A, also while charging
- On/off slide switch
- Status LED: red at low battery level, otherwise green
Application Examples:
- Solar power supply for Arduino, ESP32 and sensor projects
- Mobile 5 V supply via USB
Documentation:
Technical Data:
- Chip: CN3065
- Solar input: 4.4 to 6 V, typically 5 V
- USB input: 5 V, mini USB
- Battery: 3.7 V lithium, end-of-charge voltage 4.2 V
- Charging current: typically 500 mA, max. 600 mA
- Output: 5 V, max. 1 A, USB-A
- Connectors: 2× JST 2.0 (BAT, SOLAR)
- Dimensions: 68 × 50 × 7.5 mm
- Weight: 16 g
Scope of Delivery:
- 1× Solar Lipo Charger with USB 5V 1A V2.3
Solar Lipo Charger with USB 5V 1A V2.3
- Brand: Lilygo
- Product Code: 422489
- Availability: In Stock
-
CHF10.90
- Ex Tax: CHF10.08
Related Products
JST 2.0 Lipo Connection Cable 15cm with Plug
This connection cable connects boards with a 2-pin JST-PH socket (2 mm pitch) to a LiPo battery or a..
CHF0.80 Ex Tax: CHF0.74
DFRobot Micro 3.3V Solar Set
This DFRobot set consists of the Solar Power Manager Micro with the SPV1050 and a monocrystalline 2 ..
CHF18.90 Ex Tax: CHF17.48
DFRobot Solar Power Manager 5V 1A
The DFRobot Solar Power Manager 5V charges a single 3.7 V lithium cell with up to 900 mA from a 5 V ..
CHF13.90 Ex Tax: CHF12.86
5V 1A Monocrystalline Solar Panel 6W with USB Connection
This flexible monocrystalline silicon solar panel delivers 5 V at a USB-A socket via a built-in volt..
CHF19.90 Ex Tax: CHF18.41
Solar Power Manager V1.0 for 9V/12V/18V Solar Panel
The DFRobot Solar Power Manager charges a single 3.7 V lithium cell (Li-ion or LiPo) with up to 2 A ..
CHF36.90 Ex Tax: CHF34.14
Solar Cell 5V 200mA 1W 110x60mm
This small polycrystalline silicon solar cell delivers 5 V and up to 200 mA, i.e. 1 W. It is suitabl..
CHF7.90 Ex Tax: CHF7.31
MPPT SD05CRMA Solar Charge Controller for Li-Ion / Lipo Batteries
This solar charging module with the SD05CRMA chip charges a single-cell (3.7 V) Li-ion or LiPo batte..
CHF6.90 Ex Tax: CHF6.38
LilyGo TTGO T-BAT 18650 Battery Holder with CN3065 Solar Power Manager
The LilyGo T-BAT combines a solar charge controller with the CN3065 chip and a battery holder for on..
CHF12.90 Ex Tax: CHF11.93
DFRobot 3.7V Solar Li-Po Charge Controller
The solar charge controller from DFRobot charges a single-cell lithium battery (3.7 V) from a solar ..
CHF6.90 Ex Tax: CHF6.38
MPPT Solar Power Management Module (D) for 6V-24V Solar Panel
The MPPT Solar Power Management Module (D) is the perfect solution for projects requiring efficient ..
CHF16.90 Ex Tax: CHF15.63
10W Solar Power Kit 12V / 5V Outputs monocrystalline panel
This DFRobot solar kit powers measuring stations and IoT devices outdoors without a mains connection..
CHF46.90 Ex Tax: CHF43.39
Tags: CN3065, Solar, Power, Manager, Charge Controller, Module, 5V, 1A, Battery, 18650, 3.7V, Lipo, Li-Ion, Lithium, 500mA, Solar charger, Mini USB
















