UPS HAS 5A 4x18650 Battery Board for Raspberry Pi 5

The UPS UPS module for the Raspberry Pi 5 offers a reliable and uninterruptible power supply. This expansion board is specifically designed for the Raspberry Pi 5 and can be used as a mobile power source. It delivers a stable output of 5V at a maximum current of 5A. The intelligent power management monitors the power status of the Raspberry Pi and automatically shuts down when the Pi shuts down, extending the battery life. The module supports the detection of power outages and power supply failures, automatically switching to the UPS power supply. It can automatically turn on again after a power failure and offers the possibility of complete shutdown via software and I2C battery level detection. Additionally, it supports fast charging with a maximum charging power of 3A, allowing for quick recharging. This module is ideal for mobile power solutions in various applications such as smart cars, outdoor equipment, and surveillance scenarios.

Recommended Accessories:

• Li-Ion Battery 3.7V 3200mA NCR18650B 18650 with flat pole
• 27W USB-C PD Power Supply White for Raspberry PI

Features:

• Simple charging of the board via USB-C or DC plug 6-18V
• The module is compatible with the Raspberry Pi 5 and the Raspberry Pi USB-C power supply.
• It uses pogo pins to power the Pi, which eliminates additional wiring.
• The maximum power output is 5.1V at 5000mA.
• The integrated advanced power MOSFET minimizes power loss.
• An integrated high-efficiency buck DC-DC converter ensures optimal energy conversion with up to 95% efficiency.
• The module supports seamless switching between backup power supply and power supply.
• Ultra-low standby power consumption ensures energy efficiency.
• There are LEDs to display the battery charging and discharging status.
• The module features a 4-cell 18650 battery holder.

Application Examples:

• Mobile power supply for smart cars.
• Use in outdoor equipment and setups.
• Surveillance scenarios and mobile sensor stations.
• Power supply for Raspberry Pi projects in remote areas.
• Emergency power supply for industrial applications.

Documentation:

• DFRobot Wiki

Technical Data:

• Manufacturer: DFRobot
• Manufacturer SKU: FIT0992 
• Power input: 6-18V DC (12V DC 3A power supply recommended).
• UPS output: 5V ±5% Max 5A.
• Battery charging current: Max 2.3-3.2A.
• End of battery charging voltage: 4.23V.
• Recharge threshold: 4.1V.
• Ports and connectors: DC power jack 5.5x2.1mm, 2x 2-cell 18650 battery holder, 2x 5V power output connector XH2.54 2-pin, 2x USB2.0 type-A power output socket, 1x external power switch connector XH2.54-2P.
• Dimensions: 86 x 97 x 278mm
• Weight: 114g

Package Contents:

• 1x UPS HAT 5A 4x18650 battery board for Raspberry Pi 5 
• 1x Screw set